We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX HC-1521P memory upgrade

SKU CH-TRSB-2RTWF

8GB DDR3 1333MHz SODIMM module validated for POSIFLEX HC-1521P terminals

  • Total capacity8 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • 8GB capacity extends multitasking headroom on POSIFLEX HC-1521P terminals
  • DDR3 1333MHz speed matches PC3-10600 system bus for stable throughput
  • 35V low-voltage operation reduces power draw in kiosk deployments
  • 204-pin SODIMM form factor fits factory memory slot without adapters
  • Rigorous stress testing under load ensures reliability in continuous-use environments

System-specific SODIMM for POSIFLEX HC-1521P

This 8 GB DDR3 1333 MHz module uses the 204-pin SODIMM form factor and runs at 1.35 V. It is built as a 2Rx8 non-ECC unbuffered stick specifically validated for the POSIFLEX HC-1521P high-end touch-screen infotainment terminal.

Suits technicians upgrading that terminal.

The part is qualified only for the POSIFLEX HC-1521P, so it fits technicians servicing that exact terminal. It will not work in systems needing ECC, registered DIMMs, a different voltage, a different pin count, DDR5 or any other memory generation.

Deciding spec: 204-pin DDR3 SODIMM at 1333 MHz

The single specification that decides compatibility is the 204-pin DDR3 SODIMM interface running at 1333 MHz (PC3-10600) with 1.35 V operation and 2Rx8 organisation. Match those details to the terminal's service manual before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $2.00 per GB
Cheaper than about 93% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-828K1
Total capacity8 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

How can I verify the module is running at 1333MHz with CL9 after installing it in the POSIFLEX HC-1521P?

Enter the system BIOS or use a utility like CPU-Z to confirm the memory frequency reads 1333MHz and the CAS latency shows CL9 for the installed SODIMM.

What comes in the package and is anything else required for the upgrade?

The box contains one 8GB 204-Pin DDR3 SODIMM; no extra parts or tools are needed beyond the terminal's own memory slot access.

Which specification should I match when choosing this memory for the POSIFLEX HC-1521P?

Select the 8GB DDR3 1333MHz PC3-10600 2Rx8 1.35V 204-Pin Non-ECC Unbuffered SODIMM with part number MS10600-828K1 to match the terminal's requirements.

More in Model-Specific Memory Upgrades

Similar items