We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz SODIMM POSIFLEX PS-3415 memory upgrade

SKU CH-BBJ8-2HEX3

8GB DDR3 1333MHz SODIMM module upgrades POSIFLEX PS-3415 terminals with CL9 timing and 1.35V operation

  • Total capacity8 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333MHz speed matches system memory bus
  • 35V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits PS-3415 slot
  • Major OEM chips deliver tested reliability

NEMIX RAM 8 GB DDR3 SODIMM for POSIFLEX PS-3415

This 8 GB DDR3 SODIMM runs at 1333 MHz with CL9 latency and 1.50 V operation. The 204-pin module uses a 2Rx8 organisation and carries no ECC or heat spreader. It is built specifically for the POSIFLEX PS-3415 fanless touch-screen POS terminal.

Suits technicians upgrading a single PS-3415 slot

The part targets maintainers of the named POS terminal who need a direct 8 GB replacement. Buyers needing ECC error correction, registered buffering, or capacities beyond 8 GB should look elsewhere. Systems requiring a different pin count, voltage, or form factor cannot use this module.

204-pin DDR3 SODIMM interface decides fit

The module plugs into a 204-pin DDR3 SO-DIMM socket keyed for 1.50 V unbuffered memory. If the target board uses a different pin layout, voltage, or DDR generation the upgrade will not seat or function. Verify the socket type before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 94% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $1.87 per GB
Cheaper than about 94% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-828K1
Total capacity8 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the POSIFLEX PS-3415 need a free 204-pin SODIMM slot to accept this 8 GB module?

Yes, the module is a 204-pin DDR3 SODIMM and requires an empty SODIMM slot in the POSIFLEX PS-3415.

Will this PC3-10600 CL9 stick run stably if the terminal already has original 1333 MHz memory installed?

The module is rated DDR3 1333 PC3-10600 CL9, matching the terminal's supported speed, so it will operate at that frequency alongside existing 1333 MHz memory.

How can I confirm the upgrade is recognised at the correct 8 GB capacity after installation?

Boot the POSIFLEX PS-3415 and check the BIOS or operating system memory report; it should show the full 8 GB capacity for the installed module.

More in Model-Specific Memory Upgrades

Similar items