We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 8GB DDR3 1600 ECC UDIMM 1.35V 240-pin Dell PowerEdge R415 memory upgrade

SKU CH-Q87M-BDNKG

8GB DDR3 1600 ECC UDIMM at 1.35V, 240-pin for Dell PowerEdge R415 servers

  • Total capacity8 GB
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL11
  • Buffer typeUnbuffered
  • Rated voltage1.35 V
  • 8GB capacity expands Dell PowerEdge R415 memory headroom
  • DDR3 1600 speed with CL11 latency boosts server throughput
  • ECC unbuffered design detects and corrects data errors
  • 35V low-voltage operation reduces system power draw
  • 240-pin UDIMM form factor fits R415 DIMM slots directly

Dell PowerEdge R415 server upgrade

This 8 GB DDR3 1600 ECC UDIMM is built for the Dell PowerEdge R415 and runs at 1.35 V with CL11 timing. The single 240-pin module uses a 2Rx8 organisation and major OEM chips from Samsung, Micron or Hynix. It targets administrators who need to expand memory capacity on this specific platform.

Sustained load behaviour with ECC

Error-correcting code detects and corrects single-bit errors during continuous operation, protecting data integrity in long-running workloads. Unbuffered topology keeps latency low while the 1.35 V supply reduces power draw compared to standard 1.5 V modules. Rigorous stress testing under load verifies stability before shipment.

DDR3 interface practical limits

The DDR3 1600 (PC3-12800) interface caps bandwidth at the rated transfer rate, so total throughput scales with the number of populated slots. ECC adds one extra bit per byte, slightly increasing bus utilisation but not the peak frequency. Modules without heat spreaders rely on chassis airflow for thermal management.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $21.99
Cheaper than about 89% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $2.75 per GB
Cheaper than about 91% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR3 1600 MHz ECC Unbuffered UDIMM
Part numberME12800-828K1
Total capacity8 GB
Product type240-Pin DDR3 ECC UDIMM
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL11
ECC supportYes
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.35 V
Compatibility
Compatible systemsDell
In the box
Included items8 GB (1 × 8 GB) DDR3 1600 MHz PC3-12800 2Rx8 1.35 V 240-PIN ECC Unbuffered UDIMM

Questions about this item

How much power does the 1.35V DDR3 ECC UDIMM draw when the Dell PowerEdge R415 runs continuously?

The module operates at 1.35V, which is the low-voltage DDR3 standard, so it draws less power than 1.5V DDR3 under sustained load.

What must the Dell PowerEdge R415 already have for this 240-pin 2Rx8 module to work?

The server needs an available 240-pin DDR3 UDIMM slot that supports ECC unbuffered memory at 1600MHz and 1.35V operation.

Will this PC3-12800 CL11 stick run correctly alongside the original Samsung, Micron or Hynix chips already in my R415?

Yes, it uses the same major OEM chipsets and matches the 1600MHz speed, CL11 latency and 1.35V voltage for compatible mixed-population operation.

More in Model-Specific Memory Upgrades

Similar items