We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR3 1600 ECC UDIMM 1.35V 240-Pin Dell PowerEdge R515

SKU CH-7TTD-P2M0M

An 8 GB DDR3 1600 ECC UDIMM running at 1.35 V for Dell PowerEdge R515 servers

  • Total capacity8 GB
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL11
  • Buffer typeUnbuffered
  • Rated voltage1.35 V
  • 8GB capacity boosts server multitasking with DDR3 1600 speed
  • ECC protection prevents data errors in critical workloads
  • Low 1.35V operation reduces power draw and heat
  • 240-pin UDIMM fits Dell PowerEdge R515 directly
  • Built with major OEM chips for proven reliability

Dell PowerEdge R515 memory upgrade

This 8 GB DDR3 1600 ECC UDIMM module is built for the Dell PowerEdge R515 server. It runs at 1.35 V with a CL11 latency and uses a 2Rx8 chip organisation on a 240-pin unbuffered stick.

IT teams maintaining R515 fleets

Administrators who need validated ECC memory for existing Dell PowerEdge R515 systems will find this module a direct fit. Buyers running newer DDR5 platforms or non-Dell hardware cannot use this DDR3 form factor.

DDR3 1600 ECC UDIMM specification

The single specification that decides compatibility is the DDR3 1600 ECC UDIMM 1.35 V 240-pin interface. Only systems that accept this exact memory type will recognise and run the module.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $21.99
Cheaper than about 89% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $2.75 per GB
Cheaper than about 91% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR3 1600 MHz ECC Unbuffered UDIMM
Part numberME12800-828K1
Total capacity8 GB
Product type240-Pin DDR3 ECC UDIMM
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL11
ECC supportYes
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.35 V
Compatibility
Compatible systemsDell
In the box
Included items8 GB (1 × 8 GB) DDR3 1600 MHz PC3-12800 2Rx8 1.35 V 240-PIN ECC Unbuffered UDIMM

Questions about this item

How can I verify the 8GB DDR3 1600 ECC UDIMM is detected and running at PC3-12800 CL11 after installing it in my PowerEdge R515?

Enter the system BIOS or UEFI on boot and confirm the memory information screen shows 8GB total, 1600MT/s speed, ECC enabled, 1.35V voltage and CL11 timings for the installed DIMM.

What exactly ships in the box and are any extra parts or cables required for installation?

The package contains one 8GB 2Rx8 240-pin DDR3 ECC UDIMM module only; no heat spreader, cables, brackets or tools are included and none are needed for a standard DIMM slot installation.

Which NEMIX RAM version should I select if my server needs a single 8GB 1.35V ECC UDIMM matching part SNP96MCTC/8G?

Choose the ME12800-828K1 model listed here; it is the 8GB 1X8GB DDR3 1600 PC3-12800 2Rx8 1.35V ECC UDIMM built for Dell PowerEdge R515 compatibility.

More in Model-Specific Memory Upgrades

Similar items