We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connectors and black memory chips

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 PC4-17000 CL15 260-pin SODIMM memory upgrade

SKU CH-WCC1-H2A5E

DDR4 2133 SODIMM adds 8 GB of non-ECC memory to the POSIFLEX XT-6315E terminal at 1.2 V and CL15 latency

  • Total capacity8 GB
  • Rated speedDDR4 2133 (PC4 17000)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL15
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 8GB DDR4 capacity boosts POS terminal responsiveness
  • 2133MHz speed with CL15 latency handles transaction workloads
  • 2V low-voltage operation reduces heat in fanless systems
  • 260-pin SODIMM form factor fits POSIFLEX XT-6315E exactly
  • Major OEM chips from Samsung, Micron or Hynix ensure reliability

Targeted POS memory upgrade

This 8GB SODIMM module is built for the POSIFLEX XT-6315E JIVA High-End Fanless POS Terminal with Celeron Chipset. It delivers a direct DDR4 2133 upgrade for point-of-sale systems requiring reliable, low-voltage memory. The unbuffered, non-ECC design matches the platform's native requirements. Installers can add capacity without configuration changes.

Single-rank capacity for transaction workloads

The 8GB density handles typical POS software, local databases and peripheral drivers with comfortable headroom. Dual-rank 2Rx8 organisation supports the memory controller's interleaving for steady throughput at 2133 MT/s. Workloads that exceed 8GB will page to storage, increasing latency during peak checkout periods. The module fills one 260-pin slot and leaves no room for a second stick in single-slot terminals.

Low-voltage operation in fanless chassis

Rated at 1.20V, the module draws minimal power and generates little heat inside the sealed POS enclosure. Samsung, Micron or Hynix DRAM chips are stress-tested under load before shipping. No heat spreader is fitted, relying on the terminal's passive thermal design. Silent operation is maintained because the memory adds no active cooling requirement.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $41.99
Cheaper than about 80% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $5.25 per GB
Cheaper than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 2133 MHz Non-ECC Unbuffered SODIMM
Part numberMS17000-828K1
Total capacity8 GB
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 2133 (PC4 17000)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL15
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR4 2133 MHz PC4-17000 2Rx8 1.2 V CL15 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Will this DDR4 2133 CL15 SODIMM run alongside the original memory in my POSIFLEX XT-6315E terminal?

Yes, the module matches the terminal's DDR4 2133 specification, 1.2 V voltage and CL15 timing, so it will operate at the same speed and latency as the factory-installed memory.

How can I verify the 8 GB module is recognised and running at PC4-17000 after installation?

Enter the system BIOS or UEFI and confirm the memory size shows 8 GB, speed reads 2133 MT/s and CAS latency reads 15.

Does the MS17000-828K1 package include any tools, brackets or thermal pads, or must I buy them separately?

The package contains only the 8 GB 260-pin SODIMM; no tools, brackets or thermal pads are included.

More in Model-Specific Memory Upgrades

Similar items