We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 CL17 260-PIN SODIMM POSIFLEX HS-6514

SKU CH-93B9-663N6

8GB DDR4 2400 CL17 SODIMM module built for the POSIFLEX HS-6514 terminal

  • Total capacity8 GB
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • Designed for POSIFLEX HS-6514 all-in-one terminals
  • 8 GB DDR4 2400 MHz CL17 single module
  • Low 1.20 V power draw for efficiency
  • 260-pin SODIMM fits compact POS chassis
  • Built with major OEM Samsung Micron Hynix chips

POSIFLEX HS-6514 terminal memory upgrade

This NEMIX RAM module is an 8 GB DDR4 SODIMM built specifically for the POSIFLEX HS-6514 high-end compact all-in-one terminal with replaceable printer. It runs at 2400 MHz with a CAS latency of 17 and operates at 1.2 V. The unbuffered, non-ECC design matches the terminal’s original memory specification.

Replacing slower or smaller DDR4 SODIMMs

If the terminal currently uses a lower-capacity DDR4 module or one rated below PC4-19200, this 8 GB stick restores the intended memory bandwidth for point-of-sale workloads. The upgrade is worthwhile when the system shows sluggish multitasking or when the application suite demands more than the existing memory can provide.

Check terminal memory slot and maximum capacity

Verify that the HS-6514 has a free 260-pin SODIMM slot or that you are replacing the only installed module. Confirm the terminal’s maximum supported memory per slot and in total before ordering. Ensure the BIOS is up to date so the new module is recognised at its rated speed.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $43.99
Cheaper than about 79% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $5.50 per GB
Cheaper than about 70% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 2400 MHz Non-ECC Unbuffered SODIMM
Part numberMS19200-828K1
Total capacity8 GB
Product type260-PIN DDR4 SODIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR4 2400 MHz PC4-19200 2Rx8 1.2 V CL17 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Will this 260-pin SODIMM fit the memory slot in a POSIFLEX HS-6514 terminal?

Yes, the module is a 260-pin DDR4 SODIMM built to match the POSIFLEX HS-6514 slot exactly.

What is the correct way to seat the module, and what step do people often miss?

Insert the SODIMM at an angle until the gold contacts disappear, then press down firmly until both side clips click into the notches.

Does this 1.20 V DDR4 module need any future maintenance or replacement?

No, it is a non-ECC unbuffered SODIMM with no moving parts and no heat spreader, so it requires no ongoing maintenance.

More in Model-Specific Memory Upgrades

Similar items