We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black chips, gold edge connector, thin rectangular SODIMM module

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 CL17 260-pin SODIMM POSIFLEX XT-6315E memory upgrade

SKU CH-QPBJ-4ZTJH

8 GB DDR4 2400 SODIMM for POSIFLEX XT-6315E terminals, CL17, 1.20 V, 260-pin unbuffered non-ECC

  • Total capacity8 GB
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 8 GB capacity expands POS terminal multitasking headroom
  • DDR4 2400 MHz speed matches system memory bus
  • CL17 latency and 1.2 V voltage keep timing stable
  • 260-pin SODIMM form factor fits the XT-6315E slot
  • Built with major OEM chips for reliable operation

System-specific memory for POSIFLEX terminals

This 8 GB DDR4 SODIMM is built for the POSIFLEX XT-6315E JIVA fanless point-of-sale terminal. It delivers a straight-forward capacity increase for retailers, hospitality operators or integrators who need reliable memory in a compact, fanless chassis.

Unbuffered non-ECC module with 260-pin layout

The stick uses a standard 260-pin SODIMM edge connector and 2Rx8 organisation, so it seats directly into the terminal’s single memory slot without adapters. Major-brand Samsung, Micron or Hynix chips are used, and the module carries no heat spreader, keeping the profile low for tight enclosures.

Low-voltage operation at CL17 latency

Rated at 1.20 V and DDR4 2400 (PC4-19200) with CAS latency 17, the module runs cool and draws minimal power — an advantage in fanless designs where every watt adds to the thermal load. No moving parts mean silent operation under continuous retail workloads.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $41.99
Cheaper than about 80% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $5.25 per GB
Cheaper than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 2400 MHz Non-ECC Unbuffered SODIMM
Part numberMS19200-828K1
Total capacity8 GB
Product type260-PIN DDR4 SODIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR4 2400 MHz PC4-19200 2Rx8 1.2 V CL17 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

What speed does the DDR4 2400 SODIMM run at in the POSIFLEX XT-6315E?

The module operates at DDR4 2400 (PC4-19200) with CL17 latency at 1.20 V, so the terminal's memory controller will run it at that rated speed.

Does the 260-pin SODIMM fit the POSIFLEX XT-6315E's memory slot?

Yes, it is a standard 260-pin DDR4 SODIMM designed for the XT-6315E's SO-DIMM socket, with no heat spreader to interfere with the fanless chassis.

How is the module installed and what step is often missed?

Power off the terminal, open the access panel, align the notch on the 260-pin edge connector, insert at an angle, then press down until both retention clips click — the step often missed is fully seating both clips so the module locks flat.

More in Model-Specific Memory Upgrades

Similar items