We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips in a single row, 288 gold edge contacts, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 PC4-19200 CL17 1Rx8 1.2V 288-Pin UDIMM memory upgrade

SKU CH-TEFX-61V44

An 8 GB DDR4 2400 UDIMM module running at 1.2 V with CL17 latency for desktop upgrades

  • Total capacity8 GB
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL17
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 8 GB capacity adds responsive multitasking headroom
  • DDR4 2400 speed delivers 19200 MB/s peak bandwidth
  • CL17 latency keeps data access tight
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop DIMM slots

8 GB DDR4 2400 UDIMM for desktop upgrade

This 8 GB DDR4 2400 module fits standard 288-pin UDIMM slots on compatible desktop motherboards. It is built for owners of Hynix-based systems who need a straightforward capacity increase. The stick uses major OEM chips from Samsung Micron or Hynix and runs at the standard 1.2 V.

Steady throughput at CL17 latency

Under continuous workloads the module maintains its rated 2400 MT/s transfer rate with a CAS latency of 17 cycles. The unbuffered non-ECC design keeps signal paths short so sustained reads and writes stay consistent without registered overhead. Rigorous stress testing under load verifies stability for long sessions.

Single rank 1Rx8 organisation decides fit

The 1Rx8 rank layout determines whether the board's memory controller can address the full 8 GB in a single slot. Boards that require dual-rank or x4 organisation will not recognise the capacity correctly. Match this rank spec to the system manual before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $50.99
Cheaper than about 77% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $6.37 per GB
Cheaper than about 62% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineHynix Server/Workstaion Compatible Series Memory
Model nameHynix DDR4 2666 MHz Non-ECC Unbuffered UDIMM
Part numberMD19200-818K1
Total capacity8 GB
Product type288-Pin DDR4 UDIMM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL17
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsHynix
In the box
Included items8 GB (1 × 8 GB) DDR4 2400 MHz PC4-19200 1Rx8 1.2 V CL17 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

How much power does this 1.2 V DDR4 2400 module draw during all-day use?

It runs at the standard DDR4 voltage of 1.2 V, keeping heat and power draw low for continuous operation.

What motherboard slot is required for this 288-pin UDIMM to work?

A desktop board with a standard 288-pin DDR4 DIMM slot that supports non-ECC unbuffered memory.

Will this CL17 2400 MHz stick run stably alongside 2666 MHz modules I already own?

Yes — the system will clock both modules down to the lowest common speed, so the 2400 MHz module works with faster DDR4 kits.

More in Model-Specific Memory Upgrades

Similar items