We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black chips, 260-pin DDR4 8GB memory stick

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX XT-8317 memory upgrade

SKU CH-WQ3E-AXR21

8GB DDR4 3200 CL22 SODIMM upgrades POSIFLEX XT-8317 terminals with 1.2V operation

  • Total capacity8 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR4 3200 speed matches system memory bus
  • CL22 latency keeps data flow consistent
  • 20V operation reduces power draw and heat
  • 260-pin SODIMM fits POSIFLEX XT-8317 slot exactly

POSIFLEX XT-8317 POS Terminal Memory

This 8 GB DDR4 SODIMM is built specifically for the POSIFLEX XT-8317 fanless point-of-sale terminal. It targets retailers, hospitality operators and system integrators who need a reliable memory upgrade for that exact platform. The module is tested for compatibility with the terminal's motherboard and firmware.

Upgrade from 4 GB or failed module

The jump is worthwhile when the terminal currently runs a single 4 GB stick or when an existing module shows errors under load. Adding this 8 GB unit doubles the capacity available to the POS application and restores stability in mission-critical environments. No benefit appears if the system already uses matched 8 GB modules.

Tool-free slot access on fanless chassis

Installation requires opening the terminal's service panel, aligning the 260-pin key and pressing until the latches click. The low-profile design fits the slim enclosure without a heat spreader. The most common issue is seating the module fully in the tight SODIMM socket; incomplete insertion causes a no-post condition.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $44.99
Cheaper than about 79% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $5.62 per GB
Cheaper than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 3200 MHz Non-ECC Unbuffered SODIMM
Part numberMS25600-828K1
Total capacity8 GB
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Will the 260-pin SODIMM fit the POSIFLEX XT-8317 memory slot?

Yes, the module is a 260-pin DDR4 SODIMM built for the POSIFLEX XT-8317 JIVA Fanless POS Terminal.

Which way does the key notch on the DDR4 SODIMM face when inserting it into the POSIFLEX XT-8317?

Align the off-centre notch on the gold edge with the slot key, press firmly until the side clips click — the common error is stopping before both clips latch.

Does the CL22 1.20V module need any future firmware updates or component swaps?

No firmware or scheduled swaps are required; the DDR4 SODIMM is a passive component rated for the life of the POSIFLEX XT-8317.

More in Model-Specific Memory Upgrades

Similar items