We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips, 260-pin edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 1.2V 260-pin SODIMM POSIFLEX EK-2452 memory upgrade

SKU CH-GVVD-Q99D9

8 GB DDR4 3200 SODIMM module for POSIFLEX EK-2452 kiosks, CL22 2Rx8 unbuffered at 1.2 V

  • Total capacity8 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 8 GB capacity expands kiosk multitasking headroom
  • DDR4 3200 speed matches POSIFLEX EK-2452 spec
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM fits Mercury Series slot directly
  • Major OEM chips validated under load for stability

8 GB DDR4 3200 SODIMM for POSIFLEX EK-2452

This module is an 8 GB DDR4 3200 CL22 2Rx8 1.2 V 260-pin SODIMM built for the POSIFLEX EK-2452 Mercury Series kiosk. It uses unbuffered non-ECC chips from major OEM suppliers and carries the part number MS25600-828K1. The stick installs in the standard SODIMM slot without tools.

Suits kiosk operators upgrading a single slot

The part fits owners of the POSIFLEX EK-2452 who need to replace a failed module or increase capacity in one slot. It does not suit systems that require ECC, registered DIMMs, 288-pin desktop DIMMs or a different voltage. Buyers with laptops or servers using other form factors should look elsewhere.

Deciding spec is 260-pin DDR4 SODIMM at 1.2 V

The single specification that determines compatibility is the 260-pin DDR4 SODIMM interface running at 1.2 V. If the target machine accepts that exact module type the upgrade will work; if it demands a different pin count, voltage or DDR generation the module will not fit or function.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $47.99
Cheaper than about 78% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $6.00 per GB
Cheaper than about 65% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 3200 MHz Non-ECC Unbuffered SODIMM
Part numberMS25600-828K1
Total capacity8 GB
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

What slot and pin count does this module need in the POSIFLEX EK-2452?

It fits a DDR4 260-pin SODIMM slot, the standard socket used by the EK-2452 motherboard.

Which way round does the 2Rx8 module go in, and what clicks to confirm it is seated?

Align the notch on the gold edge with the key in the slot, push in at an angle, then press down until the side clips snap into the notches on the PCB.

When should I expect to replace this 1.2 V CL22 stick in a kiosk running 24/7?

DDR4 SODIMMs have no moving parts; plan replacement only if memory errors appear or a future BIOS update demands higher speed or capacity.

More in Model-Specific Memory Upgrades

Similar items