Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8 GB DDR4 3200 SODIMM module for POSIFLEX TK-2132 kiosk, CL22 1.2 V 260-pin unbuffered
This 8 GB DDR4 3200 module is built for the POSIFLEX TK-2132 Stellar Series kiosk. It arrives as a single 260-pin SODIMM rated at PC4-25600 with CL22 latency and 1.20 V operation. The 2Rx8 unbuffered design targets point-of-sale and kiosk workloads that demand verified compatibility.
Running at the standard 1.20 V keeps power draw low inside the compact kiosk chassis. Without a heat spreader the module relies on the system's existing airflow, which is sufficient for typical POS transaction processing. The unbuffered non-ECC design adds no extra electrical load.
All units are stress-tested under load before shipping to confirm stability during extended operating hours. The major OEM DRAM from Samsung, Micron or Hynix maintains rated 3200 speed without throttling in the validated POSIFLEX platform. Continuous operation stays within the specified voltage and latency envelope.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model name | POSIFLEX POS DDR4 3200 MHz Non-ECC Unbuffered SODIMM |
| Part number | MS25600-828K1 |
| Total capacity | 8 GB |
| Product type | 260-Pin DDR4 SODIMM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL22 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | POSIFLEX POS |
| In the box | |
| Included items | 8 GB (1 × 8 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Power off the kiosk, open the memory compartment, align the notch on the 260-pin module with the slot key, press firmly until both retention clips click, then verify 3200 MT/s in BIOS.
No scheduled maintenance is required; the module has no heat spreader and runs at 1.20 V. Replace only if a memory diagnostic reports errors or capacity must be increased.
The CAS latency of 22 cycles at 3200 MT/s sets the response-time floor; thermal throttling is unlikely at 1.20 V without a spreader, so latency remains the primary constraint.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?