We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM CL22 1Rx8 ASUS Pro WS WRX80E-SAGE SE WiFi memory upgrade

SKU CH-5V7T-TP6EV

8GB DDR4 3200 ECC registered DIMM for ASUS Pro WS WRX80E-SAGE SE WiFi motherboards

  • Total capacity8 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity on multi-module server boards
  • 3200 MHz DDR4 speed matches platform memory controller spec
  • 2 V operation reduces power draw per module
  • Validated for ASUS Pro WS WRX80E-SAGE SE WiFi motherboard

ASUS WRX80E-SAGE SE WiFi compatible DDR4 ECC RDIMM

This 8 GB registered DIMM is built for the ASUS Pro WS WRX80E-SAGE SE WiFi motherboard. It targets system integrators and IT professionals who need validated ECC memory for stable server or workstation operation. The single-rank module installs in a standard 288-pin DDR4 slot. No heat spreader is fitted, keeping the profile low for dense configurations.

DDR4 3200 registered ECC operates within JEDEC

The module runs at 1.20 V with a CAS latency of CL22. Registered buffering adds one clock cycle of address-command delay, which is required by the platform chipset. Mixing registered and unbuffered DIMMs is not supported by the memory controller. Population rules for the WRX80E-SAGE SE WiFi board dictate which slots must be filled first for correct channel interleaving.

1Rx8 organisation decides upgrade path

Each stick provides a single 8-bit rank, so total capacity scales with the number of populated slots. Builders who need more than 8 GB per channel must add further modules rather than using a dual-rank alternative. Systems requiring higher per-DIMM density or non-ECC memory cannot use this part.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $72.99
Cheaper than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $9.12 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineASUS Server Motherboard Compatible Series Memory
Model nameASUS DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-818K1
Total capacity8 GB
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsASUS
In the box
Included items8 GB (1 × 8 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Should I choose the 8GB module or add multiple sticks for the ASUS Pro WS WRX80E-SAGE SE WiFi?

The module is an 8GB single rank 1Rx8 DDR4 3200 ECC RDIMM; populate the board's eight DDR4 slots in matched sets to reach the desired total capacity.

What does the DDR4 3200 PC4-25600 rating deliver once installed in the workstation?

It runs at 3200 MT/s with CL22 latency at 1.2V, providing registered ECC bandwidth of PC4-25600 for stable server workloads.

How does the 288-pin RDIMM interface and registered ECC design affect compatibility and speed limits?

The 288-pin DDR4 RDIMM fits only DDR4 RDIMM slots; the registered buffer and ECC require a supporting chipset and cap operation to the module's rated 3200 MT/s.

More in Model-Specific Memory Upgrades

Similar items