We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM CL22 1Rx8 memory upgrade

SKU CH-F9AQ-V3B5E

Adds 8 GB of DDR4 3200 ECC registered memory with CL22 latency for Micron-compatible servers

  • Total capacity8 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on dense server platforms
  • DDR4 3200 speed matches PC4-25600 bandwidth for responsive throughput
  • 2 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits standard server memory slots

8GB DDR4 3200 ECC RDIMM for Micron Servers

This 8 GB registered DIMM runs at DDR4 3200 with a CAS latency of CL22 and 1.20 V. It is built for Micron server and workstation platforms that require ECC error correction and registered signalling. The single-rank 1Rx8 organisation uses 288-pin DDR4 RDIMM form factor. Buyers who need unbuffered UDIMM modules or non-ECC memory for desktop boards cannot use this product.

Registered ECC limits to qualified server platforms

Registered ECC memory only functions in motherboards that explicitly support RDIMM and ECC operation; consumer chipsets will not initialise the module. The DDR4 3200 PC4-25600 interface provides the stated bandwidth within the server's qualified memory population rules. Mixing registered and unbuffered DIMMs, or exceeding the platform's rank-per-channel limit, will prevent the system from posting.

Straightforward slot installation

The 288-pin RDIMM inserts vertically into the server's DDR4 memory slots; alignment notches prevent incorrect orientation. No heat spreader is fitted, so clearance is minimal inside dense chassis. Always consult the system owner's manual for supported population order and maximum capacity per channel before installing. Incorrect slot order or unsupported rank configuration are the most common reasons the module is not recognised.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $78.99
Cheaper than about 70% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $9.87 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineMicron Server/Workstaion Compatible Series Memory
Model nameMicron DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-818K1
Total capacity8 GB
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsMICRON
In the box
Included items8 GB (1 × 8 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Should I choose the 8GB 1Rx8 module or look for a different capacity?

This listing is a single 8GB 1Rx8 registered DIMM; add more identical modules to reach the total capacity your server board supports.

What does the 3200 MT/s rating deliver once installed in a server?

The module runs at DDR4-3200 (PC4-25600) with CL22 latency, providing ECC error correction and registered buffering for stable throughput in compatible Micron systems.

How does the 288-pin RDIMM interface limit real-world use?

The 288-pin DDR4 RDIMM form factor fits only DDR4 registered DIMM slots; it cannot be used in unbuffered UDIMM, SO-DIMM or DDR5 sockets.

More in Model-Specific Memory Upgrades

Similar items