We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM CL22 1Rx8 Tyan Transport CX GC68A-B8036

SKU CH-6FFQ-4M9JP

8GB DDR4 3200 ECC RDIMM CL22 1Rx8 1.20V 288-pin registered server memory for Tyan Transport CX GC68A-B8036

  • Total capacity8 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 3200 MT/s throughput matches Tyan Transport CX GC68A-B8036 specifications
  • 2 V operation reduces power draw per 8 GB module
  • 288-pin DDR4 RDIMM form factor ensures direct slot compatibility

System-Specific DDR4 RDIMM for Tyan Transport CX

This 8 GB registered ECC module runs at DDR4 3200 with CL22 latency and 1.20 V operation. It uses a 1Rx8 organisation on a 288-pin RDIMM form factor and is validated for the Tyan Transport CX GC68A-B8036 platform. The part number is MR25600-818K1 and chips are sourced from major OEM suppliers.

Upgrade from non-ECC or lower-capacity DDR4 RDIMMs

Replacing unbuffered or non-ECC memory with this registered ECC module adds error correction and signal integrity for mission-critical workloads. The jump is worthwhile when your Tyan server requires registered DIMMs and you need to populate empty slots or replace failed sticks with a compatible 8 GB unit.

Verify your motherboard requires DDR4 RDIMM ECC

Confirm the Tyan Transport CX GC68A-B8036 manual lists DDR4 3200 registered ECC RDIMMs with 1Rx8 organisation and 1.20 V support. Ensure the memory controller accepts CL22 timing and that the system BIOS is current enough to recognise the module. Do not install in platforms that require unbuffered or non-ECC DIMMs.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $79.99
Cheaper than about 70% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $10.00 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTyan Server/Workstation Motherboard Compatible Series Memory
Model nameTyan DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-818K1
Total capacity8 GB
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTyan
In the box
Included items8 GB (1 × 8 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will the 288-pin DDR4 RDIMM fit the memory slots on my Tyan Transport CX GC68A-B8036 server?

Yes, this module uses the standard 288-pin DDR4 RDIMM form factor designed for the Tyan Transport CX GC68A-B8036 motherboard slots.

What is the correct orientation for installing this registered ECC module, and which notch alignment do I check?

Align the off-centre notch on the module's gold edge with the key in the DDR4 slot; press down firmly until both side clips click shut to seat the registered DIMM.

Does the lack of a heat spreader mean I need to add active cooling or replace the module sooner?

No, the module runs at standard 1.2 V without a heat spreader; server chassis airflow is sufficient and no scheduled replacement is required.

More in Model-Specific Memory Upgrades

Similar items