We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with eight black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC UDIMM CL22 1.2V 288-Pin ASRock X570 Taichi Compatible

SKU CH-J79E-PXSPC

8GB DDR4 ECC UDIMM at 3200MHz with CL22 timing, validated for ASRock X570 Taichi motherboards

  • Total capacity8 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • ECC protection guards data integrity in critical workloads
  • 3200 MT/s DDR4 speed supports responsive multitasking
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits ASRock X570 Taichi motherboards
  • Single-rank 1Rx8 layout enables straightforward capacity scaling

ASRock X570 Taichi Compatible ECC UDIMM

This 8 GB DDR4 module is built for the ASRock X570 Taichi motherboard and targets users who need error-correcting memory on a consumer platform. It suits workstation builders, home-lab operators and enthusiasts running memory-sensitive workloads such as ZFS or virtualization on AMD AM4 hardware.

Unbuffered single-rank stick without heat spreader

The module uses a standard 288-pin UDIMM form factor and operates at 1.20 V, so it installs like ordinary desktop RAM and fits under most CPU coolers. Single-rank 1Rx8 organisation keeps electrical loading light, helping stability when populating multiple slots on the X570 Taichi board.

3200 MT/s CL22 ECC at 1.2 V

Rated for DDR4-3200 (PC4-25600) with a CAS latency of 22, this stick delivers baseline ECC throughput for the platform. Builders who need lower latency, higher frequency or registered DIMM support should look elsewhere, as this part is fixed at these timings and the unbuffered topology.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $62.99
Cheaper than about 74% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $7.87 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineASRock Server Motherboard Compatible Series Memory
Model nameASRock DDR4 3200 MHz ECC Unbuffered UDIMM
Part numberME25600-818K1
Total capacity8 GB
Product type288-Pin DDR4 ECC UDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsASRock
In the box
Included items8 GB (1 × 8 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 288-PIN ECC Unbuffered UDIMM

Questions about this item

What does the DDR4 3200 (PC4-25600) rating cap in real use?

The module runs at 3200 MT/s with CL22 timing at 1.2 V; the memory controller and motherboard BIOS determine the final speed.

What slot and clearance does the 288-pin UDIMM need?

It fits a standard 288-pin DDR4 DIMM slot; no heat spreader means low-profile clearance is not an issue.

How do I install this ECC UDIMM and what step is often missed?

Power off, open the chassis, align the notch, press firmly until the retention clips click, then enable ECC in the BIOS.

More in Model-Specific Memory Upgrades

Similar items