We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 PC4-25600 CL22 288-Pin UDIMM Dell Compatible memory upgrade

SKU CH-S8W1-TXEF1

An 8 GB DDR4 3200 UDIMM with CL22 timing and 1.2 V operation, built for Dell desktop compatibility

  • Total capacity8 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 8 GB capacity adds headroom for multitasking
  • DDR4 3200 speed delivers responsive data throughput
  • CL22 latency supports stable system timing
  • 2 V operation keeps power draw low
  • 288-pin UDIMM form factor fits compatible Dell desktops

Dell Compatible 8GB DDR4 3200 UDIMM

This NEMIX RAM module is an 8GB DDR4 3200 PC4-25600 CL22 288-pin UDIMM built for Dell desktops and workstations. It runs at 1.20V with a 1Rx6 unbuffered non-ECC layout using major OEM chips. The part is validated for Dell systems referencing SNPV0M5RC/8G.

Suits Dell owners adding single-slot capacity

Buyers upgrading a compatible Dell desktop or workstation with an open 288-pin slot can install this stick in minutes. Systems that require ECC registered modules or notebook SO-DIMM form factors cannot use this UDIMM. Builders needing speeds beyond 3200 MT/s should look elsewhere.

3200 MT/s DDR4 speed rating

The module operates at DDR4 3200 (PC4-25600) with CL22 latency at 1.20V. This speed grade decides whether the memory matches the platform's supported data rate and timing budget.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $48.99
Cheaper than about 78% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $6.12 per GB
Cheaper than about 64% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR4 3200 MHz Non-ECC Unbuffered UDIMM
Part numberMD25600-816K1
Total capacity8 GB
Product type288-Pin DDR4 UDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx6
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell
In the box
Included items8 GB (1 × 8 GB) DDR4 3200 MHz PC4-25600 1Rx6 1.2 V CL22 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Does my Dell desktop need a free 288-pin DDR4 UDIMM slot to install this 8 GB module?

Yes, the module is a 288-pin DDR4 UDIMM and requires an available DDR4 UDIMM slot on the motherboard.

Can I run this CL22 3200 MHz stick alongside slower Dell memory already in the system?

The module will operate at the speed and timings of the slowest installed memory, so mixing with slower Dell DDR4 is supported.

How can I verify the module is running at 3200 MHz with CL22 latency after installation?

Check the memory speed and CAS latency in the BIOS or with a system-information tool such as CPU-Z to confirm 3200 MHz and CL22.

More in Model-Specific Memory Upgrades

Similar items