We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR5 4800MHz CL40 1.1V UDIMM Dell Tower memory upgrade

SKU CH-27VW-A3DJE

8 GB DDR5 desktop module running at 4800 MHz with CL40 latency and 1.1 V operation for Dell Tower systems

  • Total capacity8 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • Boost system responsiveness with 8GB DDR5 4800MHz CL40 memory
  • Lower power draw at 1.1V for efficient desktop operation
  • Reliable signal integrity using major OEM Samsung Micron Hynix chips
  • Simple drop-in upgrade for compatible Dell Tower desktops
  • Unbuffered non-ECC 288-pin UDIMM installs in minutes

Dell Tower DDR5 memory upgrade

This 8GB DDR5 UDIMM is built for Dell tower desktops that accept non-ECC unbuffered memory at 4800MHz. It suits owners who want a straightforward capacity increase without ECC or registered modules. The single-rank 1Rx8 organisation keeps the electrical load light for the memory controller.

Before ordering, check compatibility

Verify that your Dell tower motherboard supports DDR5 UDIMMs at 4800MHz and does not require ECC or registered DIMMs. Confirm the board has a free 288-pin slot and that the BIOS recognises 1.10V modules. The module has no heat spreader, so ensure the chassis airflow can reach the memory area.

Sustained-load behaviour

The module runs at the standard 1.10V DDR5 voltage, so power draw remains steady during long sessions. CL40 latency is fixed by the JEDEC profile and does not tighten under load. Without a heat spreader, the DRAM relies on case airflow to maintain temperature during extended workloads.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $112.99
Cheaper than about 66% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $14.12 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD38400-818K1
Total capacity8 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsDell
In the box
Included items8 GB (1 × 8 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN Non-ECC UDIMM

Questions about this item

Does the box contain only the 8 GB DDR5 4800 MHz UDIMM or are extra parts such as a heat spreader included?

The package includes one 8 GB 288-pin DDR5 4800 MHz CL40 1.1 V UDIMM; no heat spreader or other accessories are supplied.

Should I choose a different capacity or speed for my Dell Tower, or is this 8 GB 4800 MHz module the right match?

This module is built to Dell Tower specifications at 4800 MHz CL40 1.10 V; select it when your system calls for that exact speed and voltage.

What does the 4800 MHz rating deliver once the stick is installed in my Dell Tower?

It runs at the standard DDR5 4800 MT/s data rate with CL40 latency at 1.10 V, giving the memory bandwidth your Dell Tower expects from a PC5-38400 UDIMM.

More in Model-Specific Memory Upgrades

Similar items