We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 UDIMM memory module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR5 5600 CL46 1Rx8 1.1V UDIMM Supermicro X13SAW-TLN4F memory upgrade

SKU CH-7ZGR-ZT02E

8GB DDR5 5600 module with CL46 timing and 1.1V operation, validated for the Supermicro X13SAW-TLN4F motherboard

  • Total capacity8 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 8GB

  • Exact 8GB DDR5-5600 upgrade for Supermicro X13SAW-TLN4F
  • 1Rx8 Non-ECC UDIMM at 1.1V CL46 matches board specs
  • Major OEM chips from Samsung, Micron or Hynix
  • 288-pin DDR5 form factor fits desktop motherboard slot
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR5 upgrade

This 8 GB DDR5-5600 UDIMM is built for the Supermicro X13SAW-TLN4F motherboard. It uses the 288-pin unbuffered form factor that the board requires and carries the precise 1Rx8 rank structure the memory controller expects. The module installs as a direct replacement or capacity addition without configuration changes.

Standard JEDEC thermals

Operating at the standard 1.10 V DDR5 voltage, the module runs within normal thermal limits for unbuffered desktop memory. No heat spreader is fitted, relying on case airflow for passive cooling. Power draw stays at the baseline level defined by the DDR5-5600 specification during typical workloads.

CL46 latency at 5600 MT/s

The CAS latency of CL46 at the rated 5600 MT/s speed determines whether the module meets the board's timing requirements. Systems that need a different latency or voltage will not recognise this DIMM at its rated performance. Verify the motherboard's qualified-vendor list before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $121.99
Cheaper than about 65% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $15.25 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-818K1
Total capacity8 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items8 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install this 288-pin DDR5 UDIMM in the Supermicro X13SAW-TLN4F and what step is often missed?

Align the notch on the module with the slot key, press down firmly until both retention clips click shut, then consult the motherboard manual for the approved DIMM population order so the system recognises the full 8 GB capacity.

What maintenance or replacement will this non-ECC UDIMM need over its service life?

No scheduled maintenance is required; the module has no heat spreader and runs at 1.1 V, so if a memory error appears years later the entire stick is simply replaced under the lifetime replacement warranty.

What limit appears first when this CL46 DDR5 5600 module runs under sustained load?

The fixed CAS latency of 46 cycles at 5600 MT/s sets the timing ceiling; without a heat spreader the DRAM temperature will rise until the memory controller throttles bandwidth to protect the chips.

More in Model-Specific Memory Upgrades

Similar items