We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green SODIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 96GB (2×48GB) DDR5-5600 ECC SODIMM CL46 1.1V 2Rx8 262-pin memory upgrade for Supermicro X14SAV-LVDS

SKU CH-95TV-7W6JD

96 GB dual-rank DDR5 ECC SODIMM kit (2 × 48 GB) running at 5600 MT/s CL46 and 1.1 V, validated for the Supermicro X14SAV-LVDS motherboard

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 96GB 2X48GB

  • 96 GB total capacity across two 48 GB modules for maximum system memory
  • DDR5-5600 speed with PC5-44800 bandwidth for fast data throughput
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • CL46 latency at 1.1 V for efficient low-power operation
  • 262-pin SODIMM form factor built for Supermicro X14SAV-LVDS compatibility

Exact-match DDR5 ECC SODIMM kit

This 96GB kit delivers two 48GB modules built to the DDR5-5600 standard with ECC protection and a CL46 latency at 1.1V. The 262-pin unbuffered SODIMM form factor matches the slot layout required by the Supermicro X14SAV-LVDS motherboard so the firmware recognises the full capacity at rated speed.

Upgrade from smaller or non-ECC modules

Replacing lower-capacity sticks or non-ECC memory with this 2Rx8 kit adds error correction that stops silent data corruption and removes the capacity ceiling that limits multitasking or virtualisation workloads. The jump is worth it when your current configuration cannot hold the working set or lacks the reliability needed for continuous operation.

Fits Supermicro X14SAV-LVDS memory rules

Installation follows the board's population order and maximum supported capacity, so consult the system manual before seating the modules. The kit uses major OEM Samsung, Micron or Hynix components and requires no heat spreader clearance, freeing the surrounding area for airflow or adjacent components.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,652.99
Pricier than about 66% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $17.22 per GB
Pricier than about 63% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 ECC Unbuffered SODIMM Memory
Part numberMSE44800-4828K2
Total capacity96 GB (2 × 48 GB)
Product type262-Pin DDR5 ECC SODIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 2 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 262-PIN ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 262-pin SODIMM modules fit the Supermicro X14SAV-LVDS motherboard slots?

Yes, the kit uses the 262-pin DDR5 SODIMM form factor required by the X14SAV-LVDS; it is not a full-size UDIMM or RDIMM.

What is the correct installation order for the two 48 GB modules on the X14SAV-LVDS?

Consult the system manual for the approved population sequence; the board's memory-controller rules dictate which slot must be filled first.

Does the ECC function require any software setup after the modules are seated?

No, ECC operates automatically at the hardware level once the 1.1 V DDR5-5600 CL46 modules are recognised by the BIOS.

More in Model-Specific Memory Upgrades

Similar items