We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 96GB (2×48GB) DDR5-6400 ECC RDIMM CL52 1.1V 2Rx8 Supermicro H13DSG-OM memory upgrade

SKU CH-WVEA-DVQFK

96GB DDR5-6400 ECC registered RDIMM kit (2×48GB, CL52, 1.1V) validated for Supermicro H13DSG-OM servers

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 96 GB kit lets your Supermicro H13DSG-OM run fully populated at rated capacity
  • DDR5-6400 CL52 at 1.1 V matches the board's exact timing and voltage expectations
  • Registered ECC design offloads the controller and corrects single-bit errors to prevent silent corruption
  • 2Rx8 288-pin RDIMM form factor is the precise module type the motherboard requires
  • Major-brand Samsung, Micron or Hynix chips deliver enterprise-grade reliability for production workloads

Server memory kit for Supermicro H13DSG-OM

This 96GB kit contains two 48GB DDR5-6400 Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H13DSG-OM motherboard expects. It is designed for administrators upgrading that specific platform to its full supported capacity.

DDR5-6400 Registered ECC limits

Registered DIMMs buffer address and control signals so the memory controller can drive every slot at the rated 6400 MT/s speed with CL52 latency at 1.1 V. Unbuffered UDIMMs or SODIMMs do not fit the 288-pin RDIMM slots and will not operate on this board.

Verify your configuration before ordering

Consult the Supermicro H13DSG-OM manual for the approved DIMM population order, maximum capacity per channel and any BIOS version requirements. The board requires Registered ECC RDIMMs; other form factors or non-ECC modules are incompatible.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,417.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $25.19 per GB
Pricier than about 70% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 2 × 48 GB DDR5 6400 MHz PC5-51200 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Should I pick the 96GB (2×48GB) kit or a different capacity for my Supermicro H13DSG-OM?

The 96GB (2×48GB) kit matches the board's DDR5 RDIMM slots and registered ECC design; consult your manual for the approved population order and maximum supported capacity per channel before choosing another size.

What does the DDR5-6400 (PC5-51200) rating deliver once the modules are installed in the server?

The modules run at 6400 MT/s with CL52 latency at 1.1V, giving the memory controller the exact speed and timing it expects for full-capacity operation across both DIMMs.

How does the 288-pin RDIMM interface and registered ECC design affect real-world limits?

The registered buffer lets every slot run fully populated at 96GB total while ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production.

More in Model-Specific Memory Upgrades

Similar items