We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 4800 ECC UDIMM CL40 1.1V 2Rx8 memory upgrade

SKU CH-1BCA-M6RSH

A 96 GB DDR5 ECC UDIMM kit running at 4800 MT/s with CL40 latency and 1.1 V for the Supermicro X14SAE motherboard

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeUnbuffered
  • ECC protection prevents silent data corruption
  • 96GB total capacity across two 48GB modules
  • DDR5 4800 speed with CL40 latency
  • 1V low-voltage operation reduces power draw
  • Verified fit for Supermicro X14SAE motherboard

Exact-match DDR5 ECC kit for Supermicro X14SAE

This 96GB kit delivers two 48GB DDR5 4800 UDIMM modules built to the board's native PC5-38400 specification. The 2Rx8 unbuffered ECC design matches the memory controller's expected rank, voltage and timing so the system recognises the full capacity at rated speed.

DDR5 4800 PC5-38400 sets the speed ceiling

The platform's memory controller tops out at 4800 MT/s with a CL40 latency at 1.1V, so faster modules will downclock to this limit. ECC operation adds single-bit error correction but does not raise the bandwidth beyond the PC5-38400 rating defined for this board.

Tool-free DIMM installation with population rules

Align the 288-pin key notch, press until the retention clips click, and follow the manual's slot order for dual-channel operation. Common issues are mixing UDIMMs with RDIMMs, skipping the prescribed population sequence, or exceeding the board's maximum supported capacity per slot.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,003.99
Pricier than about 68% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $20.87 per GB
Pricier than about 66% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 ECC Unbuffered UDIMM Memory
Part numberME38400-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 ECC UDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 2 × 48 GB DDR5 4800 MHz PC5-38400 2Rx8 1.1 V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I pick the 96GB kit or a different capacity for my Supermicro X14SAE?

The kit provides 96GB total in two 48GB modules. Choose this capacity if your board and CPU support 96GB of DDR5 ECC UDIMM; otherwise consult your motherboard manual for the maximum supported capacity and approved population order.

What does DDR5 4800 CL40 mean for real-world throughput?

The modules run at 4800 MT/s with a CAS latency of 40 cycles, delivering the rated PC5-38400 bandwidth when the motherboard trains them at that speed and timing.

Will the 288-pin ECC UDIMM interface work at full speed on my X14SAE?

Yes, the 288-pin unbuffered ECC UDIMM form factor matches the X14SAE's DDR5 slots, allowing the kit to operate at its specified 4800 MT/s CL40 1.1V settings when populated per the board's guidelines.

More in Model-Specific Memory Upgrades

Similar items