We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two bare green DDR5 UDIMM sticks, 96GB kit

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 UDIMM Supermicro BH4SR2-25G memory upgrade

SKU CH-PDSS-7M0BW

A 96 GB DDR5 kit with two 48 GB modules running at 5600 MT/s and CL46 latency for the Supermicro BH4SR2-25G

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 96 GB kit expands system capacity for demanding workloads
  • Dual 48 GB modules populate two slots for balanced throughput
  • DDR5 5600 speed delivers PC5-44800 bandwidth for responsive multitasking
  • 1 V operation keeps power draw low while maintaining stability
  • Validated for Supermicro BH4SR2-25G motherboard ensuring plug-in compatibility

Targeted DDR5 upgrade

This 96 GB kit delivers two 48 GB DDR5 modules rated at 5600 MHz with CL46 latency. It is built for the Supermicro BH4SR2-25G motherboard and runs at 1.10 V without ECC or heat spreaders. The unbuffered UDIMM design suits desktop workstations that need maximum capacity.

Who should consider this

Builders who want a single 96 GB kit validated for the BH4SR2-25G platform will find the 2Rx8 organisation and 288-pin layout ready to install. Users needing ECC protection, registered DIMMs, lower latency timings or speeds above 5600 MHz must select a different specification.

Decisive specification

The 5600 MHz DDR5 rating combined with CL46 CAS latency determines whether the memory controller can reach the advertised throughput. Verify that the motherboard firmware supports this exact speed and timing pair before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,159.99
Pricier than about 62% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $12.08 per GB
Pricier than about 57% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB (2 × 48 GB) DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Questions about this item

Will the 288-pin DDR5 UDIMM modules fit the Supermicro BH4SR2-25G motherboard slots?

Yes, the kit uses 288-pin DDR5 UDIMM form factor which matches the Supermicro BH4SR2-25G memory slots.

Do I need to enable XMP or change BIOS voltage to reach 5600 MHz on this 1.1 V kit?

DDR5 5600 at 1.1 V is a JEDEC standard speed; the modules run at rated frequency without XMP or manual voltage changes.

Are there heat spreaders on these 48 GB modules that could block a large CPU cooler?

The modules have no heat spreader, so they sit low and will not interfere with oversized CPU coolers.

More in Model-Specific Memory Upgrades

Similar items