We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, bare chips, no heat spreader

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5-5600 ECC RDIMM CL46 2Rx8 1.1V Supermicro H13DSG-O-CPU

SKU CH-1GZS-01ZGP

A 96GB (2×48GB) DDR5-5600 ECC registered RDIMM kit, CL46 1.1V 2Rx8, validated for Supermicro H13DSG-O-CPU motherboards

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 96 GB capacity from two 48 GB modules lets the server address larger datasets
  • Registered ECC DDR5-5600 CL46 at 1.1 V delivers rated speed with error correction
  • 2Rx8 dual-rank organisation fills each channel efficiently for full population
  • 288-pin RDIMM form factor matches the Supermicro H13DSG-O-CPU slot requirement
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade component quality

96GB DDR5-5600 ECC RDIMM Kit for Supermicro

This 96GB kit contains two 48GB DDR5-5600 registered ECC modules built for the Supermicro H13DSG-O-CPU motherboard. It targets administrators who need the exact rank, voltage, and timing the board expects so every slot is recognised at full capacity. The registered design offloads the memory controller for stable operation when all slots are populated. It is not for builders using consumer UDIMMs or boards that require unbuffered memory.

2Rx8 Registered ECC at 1.1V CL46

Each module is a 288-pin RDIMM organised as 2Rx8 with a CAS latency of 46 and a 1.1V operating voltage. The registered ECC architecture corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. This specification is the single factor that determines whether the kit will initialise at its rated 5600 MT/s on the target platform. Buyers whose systems demand a different rank structure, voltage, or latency should look elsewhere.

Two-Module Kit with Lifetime Support

The package supplies the matched pair of 48GB DIMMs required to reach 96GB in a two-slot configuration. Major OEM DRAM from Samsung, Micron, or Hynix is used across the kit, and the product carries a lifetime replacement warranty with free US-based technical support. No heat spreaders, cables, or software utilities are included. Administrators must still consult the motherboard manual for approved population order and maximum supported capacity before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,389.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $24.90 per GB
Pricier than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 2 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Does the DDR5-5600 CL46 rating mean the kit will run at 5600 MT/s on the Supermicro H13DSG-O-CPU?

Yes, the kit is spec-matched to the board's memory controller so it is recognised at the full 96 GB capacity and operates at the rated 5600 MT/s with CL46 timing.

What does the 288-pin RDIMM form factor and registered ECC design mean for slot population on this motherboard?

The registered architecture offloads the memory controller, allowing every supported slot to be fully populated at full capacity while ECC corrects single-bit errors on the fly.

Will the 2Rx8 48 GB modules fit the DIMM slots on the H13DSG-O-CPU without a heat spreader?

The modules use the standard 288-pin RDIMM height required by the board; no heat spreader is present, so clearance matches the motherboard's slot spacing.

More in Model-Specific Memory Upgrades

Similar items