We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 96GB (6x16GB) DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM GIGABYTE MZ33-CP1 memory upgrade

SKU CH-ME4J-MHTAT

Sixteen-gigabyte DDR5 RDIMM modules in a 96 GB kit with ECC and registered buffering for the Gigabyte MZ33-CP1 server board

  • Total capacity96 GB (6 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB 6X16GB

Show 18 more
  • 96 GB capacity in a 6 × 16 GB kit for dense server workloads
  • DDR5 4800 speed with CL40 timing for rated throughput
  • Registered ECC design corrects single-bit errors and stabilises full-slot operation
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard

Exact-match 96GB DDR5 kit for GIGABYTE MZ33-CP1

This 96GB kit contains six 16GB DDR5-4800 RDIMMs built to the exact rank, voltage and timing the GIGABYTE MZ33-CP1 motherboard expects. Each module is a 1Rx8 registered ECC DIMM operating at 1.1V with CL40 latency. The kit arrives new and ready to install in all six slots.

DDR5-4800 registered ECC limits

The DDR5-4800 (PC5-38400) standard sets the maximum transfer rate and the registered buffer adds one cycle of command delay, which is normal for server platforms. ECC corrects single-bit errors on the fly but cannot fix multi-bit failures. Population rules in the board manual dictate which slots must be filled first and may restrict maximum capacity per channel.

288-pin RDIMM build and daily handling

Modules use a bare 288-pin PCB without a heat spreader, relying on chassis airflow for cooling. The registered design keeps electrical loading low when all six slots are populated, helping the memory controller maintain stability. Handle the DIMMs by the edges, align the key notch with the slot, and press firmly until the ejectors click to seat them correctly.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,554.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (6 × 16 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $26.61 per GB
Pricier than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-618K6
Total capacity96 GB (6 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items96 GB 6 × 16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 96GB kit or a smaller capacity for my GIGABYTE MZ33-CP1?

The 96GB kit provides six 16GB modules that fully populate the board's DDR5 slots, delivering the maximum supported capacity at the rated 4800 speed with 1Rx8 registered ECC.

What does the DDR5 4800 rating mean once the modules are installed in the server?

The memory controller will run the kit at 4800 MT/s with CL40 timings at 1.10V, and the registered design keeps every slot stable at full population.

How does the 288-pin RDIMM interface limit what I can install?

The 288-pin registered form factor is required by the MZ33-CP1; UDIMM or SODIMM modules will not fit or function in this platform.

More in Model-Specific Memory Upgrades

Similar items