We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules, bare chips, no heat spreader

NEMIX RAM

NEMIX RAM 96GB (6x16GB) DDR5 5600 ECC RDIMM CL46 1.1V 1Rx8 GIGABYTE MS34-CP0 memory upgrade

SKU CH-Q9HD-TVT6T

Six 16 GB DDR5 registered ECC RDIMMs running at 5600 MT/s CL46 1.1 V, validated for the GIGABYTE MS34-CP0 motherboard

  • Total capacity96 GB (6 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB 6X16GB

Show 18 more
  • 96 GB total capacity from six 16 GB modules for maximum server density
  • DDR5-5600 speed with CL46 latency delivers rated throughput on the GIGABYTE MS34-CP0
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 1Rx8 rank matches the board's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the specified motherboard slots without adapters

Exact-match DDR5-5600 kit for Gigabyte MS34-CP0

This 96 GB kit contains six 16 GB registered ECC RDIMMs built to DDR5-5600 PC5-44800 specifications. It targets administrators upgrading a Gigabyte MS34-CP0 motherboard where the memory controller requires the exact rank, voltage and timing profile supplied here. Each module is a 288-pin DDR5 RDIMM rated at CL46 and 1.1 V.

Registered design with ECC for full-slot stability

The registered architecture buffers address and command signals so all six slots can run populated at rated speed without overloading the memory controller. On-die ECC corrects single-bit errors in flight, preventing silent data corruption and unplanned reboots in production workloads. Modules ship without heat spreaders, matching the board's mechanical clearance and airflow expectations.

Replaces mixed-capacity or slower DDR5 RDIMMs

The jump is worth it when the server currently runs a partial population, mixed-rank modules or lower-speed DDR5 that forces the controller to downclock. Installing the full six-module kit restores the platform's maximum supported bandwidth and capacity in one step. Buyers who need a different total capacity, UDIMM form factor or non-ECC operation should look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,835.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (6 × 16 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $29.54 per GB
Pricier than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K6
Total capacity96 GB (6 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items96 GB 6 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What DDR5 speed and PC5 rating does this 96GB kit run at?

The kit operates at DDR5 5600 with a PC5 44800 data rate, matching the GIGABYTE MS34-CP0 motherboard specification.

Which physical form factor and pin count must the MS34-CP0 board accept for these modules?

Each module is a 288-pin DDR5 RDIMM; the board requires registered DIMM slots, not UDIMM or SODIMM sockets.

In what order should the six 1Rx8 sticks be populated on the MS34-CP0, and what step is often missed?

Follow the motherboard manual for approved DIMM population order; the step often missed is verifying the exact slot sequence before installing all six modules.

More in Model-Specific Memory Upgrades

Similar items