We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 96GB 6x16GB DDR5 5600MHz CL46 1Rx8 1.1V ECC Registered RDIMM memory upgrade for Supermicro H14SST-G

SKU CH-XXPB-Y0S7G

A 96GB kit of six 16GB DDR5-5600 CL46 1.1V ECC registered RDIMM modules built for the Supermicro H14SST-G motherboard

  • Total capacity96 GB (6 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 96 GB total capacity from six 16 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H14SST-G
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • 1 V operation at 1Rx8 rank matches the board's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SST-G motherboard slots precisely

Capacity and configuration

This NEMIX RAM kit provides 96GB of DDR5 memory across six 16GB RDIMMs. Each module is a single-rank 1Rx8 part running at 5600MHz with CL46 latency at 1.1V. The registered ECC design matches the Supermicro H14SST-G motherboard requirements for full-capacity operation.

Suited workloads and limits

The kit targets servers and workstations that need registered ECC memory for data integrity and maximum slot population. It is not for systems that accept only unbuffered UDIMMs or SO-DIMMs, nor for platforms that cannot run registered DIMMs at the rated speed.

Pre-installation checks

Verify the motherboard manual for approved DIMM population order and maximum supported capacity per slot. Confirm the BIOS version supports this memory configuration and that all six slots are available for the registered RDIMM form factor.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,624.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (6 × 16 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $27.34 per GB
Pricier than about 76% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K6
Total capacity96 GB (6 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 6 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Does the Supermicro H14SST-G need all six DIMM slots filled for this 96 GB kit to run at DDR5 5600?

The board requires 288-pin RDIMMs and follows its own population rules; installing all six 16 GB modules matches the kit's validated configuration for full-speed operation.

Can I mix these 1Rx8 CL46 registered ECC modules with other DDR5 RDIMMs of different rank or latency?

Mixing ranks, latencies or voltages is not recommended; the motherboard manual specifies approved population order and identical modules ensure stable operation at 5600 MT/s.

How do I confirm the kit is running at 5600 MT/s with ECC active after installation?

Check the BIOS memory information screen or use a tool like dmidecode to verify speed shows 5600 MT/s, capacity reads 96 GB and ECC status reports enabled.

More in Model-Specific Memory Upgrades

Similar items