We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 ECC Registered RDIMM X14SDW-42C-SP9F memory upgrade

SKU CH-2BC3-C1XRR

96GB DDR5 5600 ECC registered RDIMM with CL46 latency and 1.1V operation, validated for Supermicro X14SDW-42C-SP9F motherboards

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

  • 96GB capacity lets you populate high-density server slots with a single module
  • DDR5 5600 speed matches the motherboard's rated frequency for full-rated throughput
  • CL46 CAS latency delivers the exact timing the memory controller expects
  • 2Rx4 Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1V operation at 288-pin RDIMM form factor fits the Supermicro X14SDW-42C-SP9F without adapters

Exact DDR5-5600 Registered ECC Upgrade

This 96GB DDR5 RDIMM runs at 5600MHz PC5-44800 with CL46 latency and 1.1V operation. The 2Rx4 registered ECC design matches the memory controller requirements of the Supermicro X14SDW-42C-SP9F motherboard for full-capacity recognition.

Suits Supermicro X14SDW-42C-SP9F builders needing

This module fits servers that require 288-pin registered DDR5 with ECC and 2Rx4 organisation. Builders using consumer UDIMMs, SODIMMs, non-ECC memory, or different rank configurations should look elsewhere.

Fits the X14SDW-42C-SP9F DIMM slots directly

The registered architecture reduces electrical load on the memory controller when all slots are populated. ECC corrects single-bit errors automatically. Verify your motherboard manual for approved population order and maximum supported capacity before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,581.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $26.90 per GB
Pricier than about 75% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What motherboard must I already own for this 96GB DDR5 5600 CL46 2Rx4 ECC RDIMM to be recognised at full capacity?

The module is validated for the Supermicro X14SDW-42C-SP9F motherboard running DDR5 5600 (PC5-44800) with 288-pin registered DIMM slots.

Can I keep my existing DDR5 4800 RDIMMs installed alongside this 96GB 5600 MHz kit in the same server?

The board will down-clock every populated slot to the slowest common speed, so the 5600 MHz modules would run at 4800 MHz with looser timings.

How do I confirm the 96GB kit is operating at DDR5 5600 CL46 with ECC active after installation?

Enter the BIOS or use a hardware-inventory tool such as dmidecode and verify the reported speed shows 5600 MT/s, CAS latency 46 and ECC status enabled.

More in Model-Specific Memory Upgrades

Similar items