We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 ECC RDIMM 2Rx4 CL46 1.1V 288-pin memory upgrade

SKU CH-VF9V-BP1XC

96 GB DDR5-5600 registered ECC RDIMM for Supermicro X14SDV-32C-SP3F servers

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

  • 96 GB capacity lets you run large workloads in fewer slots
  • DDR5 5600 speed delivers PC5-44800 bandwidth for demanding server tasks
  • ECC and registered design corrects single-bit errors and stabilises fully populated systems
  • CL46 latency at 1.1 V matches the memory controller timing for reliable operation
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-32C-SP3F motherboard exactly

96GB DDR5-5600 ECC RDIMM for Supermicro servers

This 96GB registered ECC DDR5 module runs at 5600MHz with CL46 latency and 1.1V operation. It is built for the Supermicro X14SDV-32C-SP3F motherboard where full-capacity recognition and rated speed matter. The 2Rx4 rank configuration matches the board's memory controller expectations exactly.

Registered ECC architecture for full-slot

The registered design buffers address and command signals so every DIMM slot can be populated at full capacity without overloading the memory controller. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. The 288-pin RDIMM form factor is required by this platform and will not fit UDIMM or SODIMM slots.

Replaces lower-capacity or non-ECC DDR5 modules

Upgrading from smaller DDR5 RDIMMs or non-ECC memory adds 96GB of protected capacity in a single slot. The jump is worth it when workloads need maximum registered ECC density and the motherboard manual confirms this population rule. Buyers who need unbuffered memory or a different pin count cannot use this module.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,692.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $28.05 per GB
Pricier than about 79% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What CAS latency does this 5600 MT/s DDR5 RDIMM run at under sustained load?

The module operates at CL46, so the memory controller waits 46 cycles at 5600 MT/s for each column access during continuous operation.

How much power and heat does a 96 GB kit of these 1.1 V registered DIMMs produce when the server runs all day?

At 1.1 V the DIMMs draw minimal power for DDR5, and with no heat spreader they rely on chassis airflow to stay cool during 24/7 workloads.

Which motherboard must I already have for this 288-pin 2Rx4 ECC RDIMM to be recognised at full 96 GB capacity?

The kit is validated for the Supermicro X14SDV-32C-SP3F motherboard, which expects 288-pin registered DDR5 at 5600 MT/s with 2Rx4 organisation.

More in Model-Specific Memory Upgrades

Similar items