We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600MHz CL46 2Rx4 1.1V 288-Pin ECC Registered RDIMM memory upgrade

SKU CH-KGJ9-HKDJY

96 GB DDR5 5600 MHz CL46 2Rx4 1.1 V 288-pin ECC Registered RDIMM validated for Supermicro X14SDW-72C-SP9F motherboards

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 4 more
  • 96 GB capacity lets you run memory-intensive workloads without swapping
  • DDR5 5600 speed matches the server controller specification for rated throughput
  • CL46 CAS latency delivers the timing the platform expects for stable operation
  • Registered ECC architecture corrects single-bit errors and offloads the controller for full-slot population
  • 1 V operating voltage reduces power draw while meeting the board's electrical requirements

Compatible Server Memory Upgrade

This 96GB DDR5 module is an exact-match upgrade for the Supermicro X14SDW-72C-SP9F motherboard. It delivers PC5-44800 speed with CL46 latency at 1.1V. The 288-pin RDIMM form factor fits the board's registered memory slots. Enterprise systems requiring ECC stability at full capacity are the target use case.

Who Should Look Elsewhere

Builders using consumer motherboards that accept only unbuffered UDIMMs cannot use this registered module. Laptop or compact systems requiring 262-pin SODIMMs are incompatible with the 288-pin form factor. Workloads needing non-ECC memory or lower density kits should consider different modules.

Deciding Specification: Registered ECC RDIMM

The single specification that determines fit is the registered ECC RDIMM architecture combined with 2Rx4 organization. Your motherboard must explicitly support registered DDR5 DIMMs with this rank structure and 1.1V operation. Consult the Supermicro X14SDW-72C-SP9F manual for approved population rules before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,657.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $27.69 per GB
Pricier than about 77% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What motherboard must I already have for this 288-pin DDR5 RDIMM to be recognised at full 96GB capacity?

The module is validated for the Supermicro X14SDW-72C-SP9F motherboard running DDR5 5600 PC5-44800; the board must accept registered ECC RDIMMs at 1.1 V and follow its documented population order.

Can I keep my existing DDR5 5600 CL46 registered ECC modules and add this 2Rx4 kit alongside them?

Mixing is only reliable when every installed DIMM matches the same speed, voltage, rank and registered ECC specification; the motherboard manual lists the approved population sequences for full-capacity operation.

How do I confirm the kit is running at the rated 5600 MT/s with CL46 timings after installation?

Enter the system BIOS or use a hardware-information utility to verify the memory reports DDR5-5600, CAS latency 46, 1.10 V and the full 96 GB per module with ECC active.

More in Model-Specific Memory Upgrades

Similar items