NEMIX RAM 96GB DDR5 5600MHz CL46 2Rx4 ECC RDIMM memory upgrade

96GB DDR5 ECC RDIMM for Supermicro H13SSH-E

This 96GB DDR5-5600 registered ECC module is built for the Supermicro H13SSH-E motherboard. It uses the 288-pin RDIMM form factor with 2Rx4 organisation and runs at 1.1V. The exact rank, voltage and CL46 timing match the board's memory controller so the full capacity is recognised at rated speed. System administrators upgrading this specific platform receive a drop-in part that meets the manufacturer's population rules.

Sustained operation with registered buffering

The registered architecture buffers address and command signals, reducing electrical load on the memory controller when every slot is populated. ECC detects and corrects single-bit errors in real time, preventing silent data corruption during long-running workloads. At the standard 1.1V DDR5 voltage the module maintains stability without additional cooling. This combination keeps a fully loaded server running at 5600 MT/s through continuous duty cycles.

Replaces lower-capacity or non-ECC DDR5 RDIMMs

Swapping smaller RDIMMs for this 96GB module increases total memory without changing voltage or timing, provided the motherboard supports the capacity per slot. Moving from unbuffered non-ECC memory adds error correction and registered signalling, which are required for full-slot population on this platform. The upgrade is worthwhile when the workload demands maximum registered ECC capacity at the native 5600 MT/s data rate.