We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM Supermicro H13SSL-NT memory upgrade

SKU CH-BSDR-XR9AY

96 GB DDR5 6400 CL52 2Rx4 1.1 V ECC registered RDIMM built for Supermicro H13SSL-NT servers

  • Total capacity96 GB
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact-match 96 GB DDR5-6400 CL52 for full rated speed
  • Registered 2Rx4 ECC RDIMM prevents silent data corruption
  • 10 V operation matches server memory controller spec
  • Verified fit for Supermicro H13SSL-NT 288-pin slots
  • Lifetime replacement warranty with US-based technical support

Exact-match server upgrade

This 96 GB DDR5-6400 RDIMM kit is built to the precise rank, voltage and timing the Supermicro H13SSL-NT memory controller expects. Registered ECC architecture allows every slot to run fully populated at rated speed while correcting single-bit errors before they affect production workloads.

Verified fitment for H13SSL-NT

The 288-pin Registered form factor matches the board's physical and electrical requirements, avoiding the incompatibilities that UDIMM or SODIMM modules would introduce. Population rules and supported capacities still depend on the specific motherboard revision, so the manual should be consulted before installation.

Enterprise-grade stability without a heat spreader

Major OEM DRAM from Samsung, Micron or Hynix underpins the CL52 1.10 V specification, and the registered buffer offloads the memory controller for reliable operation across all populated channels. Buyers who need a different capacity, a lower latency bin, or a module with an integrated heat spreader will need to select an alternative part.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,800.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $29.18 per GB
Pricier than about 83% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Will the 2Rx4 RDIMM organisation need any firmware or BIOS updates on the Supermicro H13SSL-NT before installation?

The module is an exact-match upgrade spec-matched to the H13SSL-NT memory-population rules, so it is recognised at full 96 GB capacity and runs at the rated 6400 MT/s without additional firmware steps.

What is the first limit reached when the 96 GB kit runs continuously at DDR5-6400 CL52?

The registered ECC architecture offloads the memory controller, allowing every slot to stay fully populated at full capacity and rated speed; the practical ceiling is the motherboard's maximum supported density per channel.

How much heat and power does the 1.1 V 96 GB RDIMM produce during all-day operation?

Operating at 1.10 V without a heat spreader, the module draws low power typical for DDR5 registered ECC; sustained loads stay within standard server airflow limits and add minimal thermal load to the chassis.

More in Model-Specific Memory Upgrades

Similar items