We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 6400 CL52 2Rx4 ECC RDIMM memory upgrade

SKU CH-RY4J-YBHM7

96GB DDR5 6400 CL52 2Rx4 ECC registered RDIMM validated for Supermicro H13SRH motherboards

  • Total capacity96 GB
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 96 GB capacity supports dense virtualisation workloads
  • DDR5 6400 speed delivers rated throughput for Supermicro H13SRH
  • CL52 latency meets the board's timing requirements
  • 2Rx4 registered ECC architecture corrects single-bit errors on the fly
  • 1 V operation matches the memory controller specification

Exact DDR5 96GB upgrade for Supermicro H13SRH

This 96GB DDR5 6400 RDIMM delivers the precise 2Rx4 registered ECC configuration your Supermicro H13SRH motherboard expects. The module operates at 1.1V with CL52 timing and installs in the required 288-pin slots. It is built for servers that demand full-capacity recognition at rated speed.

For administrators populating every slot on H13SRH

Registered buffering offloads the memory controller so all channels run fully populated without down-clocking, while ECC corrects single-bit errors before they corrupt data. This kit suits production databases, virtualization hosts and compute clusters that need maximum capacity per DIMM. Buyers using desktop boards, workstations that accept only unbuffered UDIMMs, or systems limited to lower densities should look elsewhere.

2Rx4 registered ECC at DDR5 6400 decides fit

The dual-rank-by-four organization, registered interface and ECC function must match the motherboard's qualified-vendor list exactly. Verify the manual for approved population order and maximum supported capacity per channel before ordering. A mismatch in rank, buffering or error-correction type will prevent the system from booting or recognizing the full 96GB.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $3,124.99
Pricier than about 73% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $32.55 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Does the DDR5 6400 PC5-51200 interface cap at 6400 MT/s in a Supermicro H13SRH?

Yes, the DDR5 6400 (PC5-51200) rating means the module runs at up to 6400 MT/s when the motherboard and CPU support that speed.

What physical slot and form factor does this 288-pin RDIMM require?

It needs a standard 288-pin DDR5 RDIMM slot; the registered form factor will not fit UDIMM or SODIMM sockets.

How is the MR51200-9624K1 kit installed, and what step do people often miss?

Insert each DIMM into the slots listed in the motherboard manual's population order, pressing until the ejectors click; the common mistake is skipping the prescribed slot sequence.

More in Model-Specific Memory Upgrades

Similar items