Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 64 GB dual-channel DDR5 kit with two 32 GB unbuffered UDIMMs at 4800 MT/s, CL40, 1.1 V, validated for Supermicro SYS-111AD-HN2 and X13SAZ-F platforms
This NEMIX RAM kit delivers 64GB of DDR5 memory across two 32GB modules. It is built for the SuperMicro IoT SuperServer SYS-111AD-HN2 and the CSE-510FT-203B platform. The modules run at 4800MHz with a CL40 latency at 1.10V. They are designed to maximise system responsiveness for compatible workstations.
This kit suits administrators upgrading the specified SuperMicro server or workstation with non-ECC unbuffered DDR5. Buyers who need ECC error correction or registered modules for a different platform should look elsewhere. Systems requiring a different pin count, voltage, or DDR generation are not compatible with this 288-pin UDIMM kit.
The memory operates at DDR5 4800 (PC5-38400) with a CAS latency of CL40. This speed and timing pair determines whether the modules match the motherboard's qualified vendor list. Verify that the target board supports 4800MHz non-ECC UDIMMs at 1.10V before purchasing.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | SuperMicro Server/Workstation Compatible Series Memory |
| Model name | SuperMicro DDR5 4800 MHz Non-ECC Unbuffered UDIMM |
| Part number | MD38400-328K2 |
| Total capacity | 64 GB (2 × 32 GB) |
| Product type | 288-Pin DDR5 UDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 64 GB (2 × 32 GB) DDR5 4800 MHz PC5-38400 2Rx8 1.1 V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
The kit ships as a matched pair of 2Rx8 DDR5 4800 UDIMMs tested under load, so no firmware updates or scheduled re-seating are required.
The modules operate at the standard 1.10 V DDR5 voltage with no heat spreader, so case airflow becomes the limiting factor before the memory itself throttles.
Each 32 GB stick runs at 1.1 V without a spreader, adding minimal watts; chassis fans typically remain at low RPM even under sustained load.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?