We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black chips, 262 gold pins, no heat spreader

NEMIX RAM

NEMIX RAM CSE-E101-04 16GB DDR5 4800 CL40 1Rx8 1.1V 262-pin SODIMM memory upgrade

SKU CH-6P1W-6736Y MPN CSE-E101-04

A 16 GB DDR5 SODIMM running at 4800 MHz with CL40 latency for SuperMicro IoT SuperServer SYS-E100-13AD-C systems

  • Total capacity16 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 16 GB DDR5 4800 CL40 boosts multitasking speed
  • 1 V operation reduces system power draw
  • 1Rx8 single-rank layout simplifies memory controller load
  • 262-pin SODIMM fits SuperMicro IoT SuperServer SYS-E100-13AD-C
  • Major OEM Samsung, Micron, Hynix chips ensure module reliability

Purpose-built DDR5 SODIMM

This NEMIX RAM module delivers 16 GB of DDR5 4800 memory in a 262-pin SODIMM form factor. It is validated for the SuperMicro IoT SuperServer SYS-E100-13AD-C and the X13SAN-C and X13SAN-C-WOHS motherboards. The stick runs at 1.10 V with CL40 latency and uses a single-rank 1Rx8 organisation built from major OEM DRAM.

Ideal for targeted server upgrades

Administrators expanding the memory of the listed SuperMicro platforms can install this non-ECC unbuffered SODIMM directly. Builders who need ECC error correction, registered buffering, a different voltage, a DIMM form factor or capacities other than 16 GB should look elsewhere.

Deciding specification

The 262-pin DDR5 SODIMM interface combined with non-ECC unbuffered operation at 4800 MT/s and 1.10 V determines whether this module fits the slot and meets the electrical requirements of the target SuperMicro systems.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $159.99
Cheaper than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $10.00 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSuperMicro DDR5 4800 MHz Non-ECC Unbuffered SODIMM
Part numberMS38400-618K1
Total capacity16 GB
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB (1 × 16 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 262-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Will this DDR5 4800 CL40 SODIMM run in my SuperMicro SYS-E100-13AD-C alongside existing DDR5 modules?

The module is built for the SuperMicro SYS-E100-13AD-C and other listed SuperMicro platforms. Match speed, voltage, rank and CAS latency with any modules already installed for stable operation.

How can I verify the 16GB DDR5 4800 module is detected and running at CL40 after installation?

Check the BIOS or UEFI memory information screen. It should show 16 GB capacity, 4800 MT/s data rate and CL40 timings at 1.10 V.

Does the package include only the 262-pin SODIMM or are any tools or brackets supplied?

The box contains one 16GB 262-pin DDR5 SODIMM. No tools, brackets or additional components are included.

More in Model-Specific Memory Upgrades

Similar items