We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, small rectangular SODIMM module

NEMIX RAM

NEMIX RAM CSE-E101-04 8GB DDR5 4800 CL40 1.1V 262-pin SODIMM memory upgrade

SKU CH-PJ3A-YMZZS MPN CSE-E101-04

8GB DDR5 4800 CL40 SODIMM for Supermicro SYS-E100-13AD-E and X13SAN-E systems

  • Total capacity8 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 8 GB capacity adds responsive multitasking headroom
  • DDR5 4800 MT/s speed accelerates data throughput
  • CL40 latency supports stable system operation
  • 10 V voltage reduces platform power draw
  • 262-pin SODIMM form factor fits Supermicro IoT SuperServer SYS-E100-13AD-E

SuperMicro E101 compatible DDR5 SODIMM

This 8 GB DDR5 module is built for the SuperMicro IoT SuperServer SYS-E100-13AD-E and the X13SAN-E motherboard family. It targets administrators who need a single, validated upgrade for those specific platforms rather than a generic laptop stick. The unbuffered, non-ECC design matches the server's native memory topology.

4800 MT/s CL40 at 1.10 V

The decisive specification is the JEDEC-standard DDR5-4800 speed grade with CL40 latency operating at 1.10 volts. Any module that deviates from this exact speed, voltage or timing will not be recognised by the SuperMicro firmware, so this part number is the only safe match for the listed systems.

Steady throughput under continuous server workloads

All modules are stress-tested under sustained load before shipping, confirming stability during extended compute tasks such as virtualization hosting or database caching. The single-rank 1Rx8 organisation and major-brand DRAM chips deliver consistent bandwidth without throttling when the system runs at full utilisation for hours.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $87.99
Cheaper than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $11.00 per GB
Pricier than about 55% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSuperMicro DDR5 4800 MHz Non-ECC Unbuffered SODIMM
Part numberMS38400-818K1
Total capacity8 GB
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items8 GB (1 × 8 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 262-PIN Non-ECC Unbuffered SODIMM

Questions about this item

How does the 4800 MT/s speed translate once the module is installed in a SuperMicro IoT SuperServer SYS-E100-13AD-E?

The module runs at DDR5 4800 (PC5-38400) with CL40 latency at 1.10 V, delivering the rated throughput provided the platform's memory controller supports that data rate.

What does the 262-pin DDR5 SODIMM interface cap in practice?

The 262-pin DDR5 SODIMM form factor limits the module to a single 1Rx8 rank at 4800 MT/s, non-ECC and unbuffered, so maximum capacity per slot is 8 GB.

What physical clearance does the module need to fit in the SYS-E100-13AD-E?

It uses a standard 262-pin DDR5 SODIMM PCB without a heat spreader, so it fits the factory SODIMM slots in the SuperMicro IoT SuperServer SYS-E100-13AD-E without extra height clearance.

More in Model-Specific Memory Upgrades

Similar items