We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM CSE-E101-04 8GB DDR5 4800 CL40 1.1V SODIMM memory upgrade

SKU CH-7EWZ-HY196 MPN CSE-E101-04

8GB DDR5 4800 SODIMM module built for SuperMicro IoT SuperServer SYS-E100-13AD-H and X13SAN-H boards

  • Total capacity8 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 8 GB capacity expands system memory for SuperMicro SYS-E100-13AD-H
  • DDR5 4800 speed delivers PC5-38400 bandwidth for responsive workloads
  • CL40 latency at 1.10 V balances timing with low power draw
  • 262-pin SODIMM form factor fits compatible SuperMicro IoT SuperServer platforms
  • 1Rx8 unbuffered non-ECC design uses major OEM chips for stable operation

What this memory upgrade is for

This NEMIX RAM SODIMM adds 8GB of DDR5 capacity to compatible SuperMicro IoT SuperServer SYS-E100-13AD-H and X13SAN-H platforms. It is a non-ECC, unbuffered module built for system-specific compatibility. Buyers needing registered or ECC memory for other server boards cannot use this module.

Thermals noise and power draw

The module runs at the standard DDR5 voltage of 1.10V without a heat spreader, relying on system airflow for cooling. As a passive component it produces no audible noise and its power draw scales with the 4800 MT/s data rate during normal operation.

Behaviour under sustained load

All modules are stress tested under load by the manufacturer to verify stability at CL40 timings. The 1Rx8 organisation and major OEM chipsets from Samsung, Micron or Hynix maintain consistent throughput during extended workloads. Systems requiring higher capacity per slot or multi-rank configurations will not be served by this single-rank design.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $85.99
Cheaper than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $10.75 per GB
Pricier than about 55% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSuperMicro DDR5 4800 MHz Non-ECC Unbuffered SODIMM
Part numberMS38400-818K1
Total capacity8 GB
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items8 GB (1 × 8 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 262-PIN Non-ECC Unbuffered SODIMM

Questions about this item

How do I install this 262-pin DDR5 SODIMM in my SuperMicro SYS-E100-13AD-H, and what step is often missed?

Power off the server, open the chassis, align the notch on the 262-pin module with the slot key, press firmly until both side clips click, then verify 4800 MT/s speed in BIOS.

What maintenance or replacement will this 8 GB 1Rx8 module need over its service life?

No scheduled maintenance is required; the module has no heat spreader and runs at 1.10 V, so only replace it if a memory test reports errors or capacity must be increased.

What limit appears first when this CL40 DDR5 4800 memory runs under sustained load?

The CL40 latency at 4800 MT/s sets the throughput ceiling; sustained workloads will hit this timing boundary before voltage or thermal limits become a factor.

More in Model-Specific Memory Upgrades

Similar items