We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, 262-pin DDR5 SODIMM form factor, no heat spreader

NEMIX RAM

NEMIX RAM CSE-E101-04 8GB DDR5 4800 CL40 262-pin SODIMM memory upgrade

SKU CH-PE3G-XCFBC MPN CSE-E101-04

8 GB DDR5 SODIMM running at 4800 MHz CL40 for Supermicro SYS-E100-13AD-C systems

  • Total capacity8 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 8 GB capacity adds responsive multitasking headroom
  • DDR5 4800 MT/s speed lifts data throughput
  • CL40 latency keeps timing tight
  • 1 V operation reduces power draw
  • 262-pin SODIMM fits Supermicro IoT SuperServer SYS-E100-13AD-C

System-specific DDR5 SODIMM for Supermicro IoT

This NEMIX RAM module delivers 8 GB of DDR5 4800 memory in a single 262-pin SODIMM. It is built for the SuperMicro IoT SuperServer SYS-E100-13AD-C and compatible X13SAN-C motherboards. The unbuffered, non-ECC design suits embedded and edge deployments that need a straightforward capacity increase.

Steady operation at 1.10 V with CL40 timing

The module runs at the standard DDR5 4800 data rate with a CAS latency of 40. Major OEM DRAM from Samsung, Micron or Hynix is stress-tested under sustained load to maintain stability in always-on environments. The 1Rx8 organisation and 1.10 V voltage keep power draw predictable during continuous workloads.

No heat spreader, direct slot installation

The bare PCB fits directly into the 262-pin SODIMM socket without extra clearance requirements. Unbuffered signalling means no register delay, simplifying the memory training sequence on supported Supermicro platforms. Builders who need ECC protection or registered DIMMs must select a different module.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $83.99
Cheaper than about 70% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $10.50 per GB
Pricier than about 54% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSuperMicro DDR5 4800 MHz Non-ECC Unbuffered SODIMM
Part numberMS38400-818K1
Total capacity8 GB
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items8 GB (1 × 8 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 262-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the 1.10 V DDR5 module add noticeable heat or fan noise when the SuperMicro SYS-E100-13AD-C runs continuously?

The SODIMM operates at the standard DDR5 voltage of 1.10 V and has no heat spreader, so its thermal contribution inside the SYS-E100-13AD-C is minimal and does not increase fan activity.

What must the SuperMicro SYS-E100-13AD-C already provide for this 262-pin SODIMM to function?

The server needs a free DDR5 SODIMM slot that accepts 1Rx8 unbuffered non-ECC modules at 4800 MT/s.

Will this CL40 4800 MT/s stick run stably alongside the original memory already installed in the SYS-E100-13AD-C?

Yes, the module is validated for the SYS-E100-13AD-C and matches the platform's DDR5 4800 specification, so it will operate with existing memory at the system's configured speed and latency.

More in Model-Specific Memory Upgrades

Similar items