We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM CSE-E102TF2 8GB DDR5 4800 CL40 1Rx8 262-PIN SODIMM memory upgrade

SKU CH-BF28-GXMAK MPN CSE-E102TF2

8GB DDR5 SODIMM runs at 4800 MT/s with CL40 latency for SuperMicro SYS-E102-13R-E servers

  • Total capacity8 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 8 GB capacity adds responsive multitasking headroom
  • DDR5 4800 speed delivers high data throughput
  • CL40 latency supports quick memory access
  • 1 V operation reduces system power draw
  • 262-pin SODIMM fits Supermicro IoT SuperServer SYS-E102-13R-E

SuperMicro DDR5 SODIMM upgrade

This 8GB DDR5 4800 CL40 module is built for the SuperMicro IoT SuperServer SYS-E102-13R-E and compatible X13SRN-E-WOHS platforms. It delivers a straightforward capacity increase for embedded or edge deployments running standard workloads. The 1Rx8 unbuffered design fits the 262-pin SODIMM slots in these specific systems. Buyers needing ECC protection or higher densities must look elsewhere.

Sustained-load behaviour

Rated at 1.10V with CL40 timings, the module maintains JEDEC-standard DDR5 4800 throughput during continuous operation. Major OEM Samsung, Micron or Hynix ICs are stress-tested under load to verify stability in always-on environments. No heat spreader is fitted, so airflow across the motherboard remains the primary cooling path. Systems with restricted chassis ventilation should verify thermal headroom before deployment.

Installation notes

The SODIMM inserts vertically into the 262-pin slot with a standard keyed notch; no tools or firmware updates are required beyond the platform's normal memory detection. The single-rank layout avoids the rank-mixing issues that can arise when populating multiple channels. The only common pitfall is attempting to use this non-ECC unbuffered stick in a slot or system that mandates registered or ECC memory.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $85.99
Cheaper than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $10.75 per GB
Pricier than about 55% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSuperMicro DDR5 4800 MHz Non-ECC Unbuffered SODIMM
Part numberMS38400-818K1
Total capacity8 GB
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items8 GB (1 × 8 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 262-PIN Non-ECC Unbuffered SODIMM

Questions about this item

How much power does the 1.10V DDR5 4800 module draw when the SuperMicro server runs continuously?

At 1.10V the SODIMM operates at the standard DDR5 4800 voltage, so power draw stays within the JEDEC limit for a 1Rx8 8GB module under sustained load.

What must the SuperMicro SYS-E102-13R-E already have for this 262-pin SODIMM to function?

The server needs a free DDR5 SODIMM slot that accepts 1.10V 1Rx8 non-ECC unbuffered modules and a BIOS that supports PC5-38400 CL40 memory.

Will this CL40 DDR5 4800 stick work alongside the original memory in my SuperMicro X13SRN-E-WOHS?

Yes, it is validated for the X13SRN-E-WOHS platform; matching speed, voltage, rank and pin count lets it run in dual-channel with the factory-installed SODIMM.

More in Model-Specific Memory Upgrades

Similar items