We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 262-pin DDR5 SODIMM modules, no heat spreader

NEMIX RAM

NEMIX RAM CSE-E302iL3 32GB (2x16GB) DDR5 4800 CL40 1.1V 262-Pin SODIMM memory upgrade

SKU CH-3S51-4ZDYT MPN CSE-E302iL3

32 GB dual-channel DDR5 4800 CL40 SODIMM kit for SuperMicro SYS-E302-13AD systems

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 32 GB dual-channel kit expands multitasking headroom
  • DDR5 4800 MT/s speed matches Supermicro SYS-E302-13AD spec
  • Low 1.10 V voltage reduces power draw
  • CL40 latency supports responsive server workloads
  • 262-pin SODIMM form factor fits SuperMicro IoT SuperServer

Compatible Memory Kit

This 32GB DDR5 SODIMM kit contains two 16GB modules rated at 4800MT/s with CL40 latency and 1.1V operation. It uses unbuffered non-ECC chips in a 262-pin form factor. The kit is validated for the SuperMicro IoT SuperServer SYS-E302-13AD model CSE-E302iL3 and the X13SAV-PS motherboard. Installation follows standard SODIMM procedure.

Builders With Matching Hardware

The kit suits technicians upgrading the specified SuperMicro IoT SuperServer or the X13SAV-PS platform where DDR5 SODIMM slots are available. It will not fit systems that require ECC registered DIMMs or standard 288-pin desktop memory. Buyers needing higher capacity per slot or lower latency timings should look at different modules. Laptops or workstations using another DDR5 SODIMM specification are not supported.

DDR5 4800 Speed Grade

The decisive specification is the DDR5 4800 speed grade, labelled PC5-38400, which determines whether the memory controller can train the modules at the rated frequency. If the target system only supports slower DDR5 speeds or an earlier DDR generation, the kit will not operate as intended. Matching this exact speed grade to the platform specification is the single compatibility gate.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $335.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $10.50 per GB
Pricier than about 54% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSuperMicro DDR5 4800 MHz Non-ECC Unbuffered SODIMM
Part numberMS38400-618K2
Total capacity32 GB (2 × 16 GB)
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB (2 × 16 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 262-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

Should I pick the 32 GB kit or a single 16 GB module?

The kit supplies two matched 16 GB SODIMMs for 32 GB total, which lets the SuperMicro SYS-E302-13AD run in dual-channel mode for higher bandwidth.

What does DDR5 4800 CL40 deliver in the SuperMicro SYS-E302-13AD?

The modules operate at the standard JEDEC DDR5 4800 rate with CL40 latency, giving the server its rated memory throughput without overclocking.

Will the 262-pin DDR5 SODIMM fit the X13SAV-PS motherboard?

Yes — the kit uses the 262-pin DDR5 SODIMM form factor specified for the SuperMicro X13SAV-PS platform, and it runs at the supported 1.1 V.

More in Model-Specific Memory Upgrades

Similar items