We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 512GB 16x32GB 6400MHz CL52 1.1V 2Rx8 ECC RDIMM Supermicro H13DSH

SKU CH-NCS6-0HJCD

512GB 16-module DDR5-6400 ECC registered RDIMM kit at 1.1V CL52, validated for Supermicro H13DSH motherboards

  • Total capacity512 GB (16 × 32 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 512 GB total capacity across 16 matched 32 GB modules
  • DDR5 6400 speed with CL52 latency for rated server performance
  • Registered ECC design corrects single-bit errors and supports full population
  • 1 V operating voltage matches the platform's memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H13DSH motherboard

Exact-match upgrade for Supermicro H13DSH

This 512 GB kit contains 16 registered DDR5 ECC RDIMM modules at 32 GB each. The 2Rx8 organisation, 1.10 V operation and CL52 timing match the H13DSH memory controller specification so the system recognises full capacity at DDR5-6400 speed. It is intended for administrators who need maximum supported memory on this platform. Builders using other motherboards or unbuffered DIMM slots cannot use this kit.

Sustained-load behaviour

Registered buffering reduces electrical load on the memory controller, allowing all 16 slots to remain populated at the rated 6400 MT/s data rate during continuous workloads. On-die ECC corrects single-bit errors in real time, preventing silent data corruption that would otherwise accumulate under heavy utilisation. The modules maintain their specified CL52 latency without downclocking when the server runs at full capacity for extended periods.

Thermals and power

Operating at 1.10 V keeps per-module power draw low even with every slot filled, helping the chassis cooling subsystem maintain stable inlet temperatures. No heat spreaders are fitted, so airflow across the bare DRAM packages is the primary cooling path; the server's standard fan profile is sufficient for normal operation. Acoustic output remains unchanged from the baseline platform configuration.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $17,396.99
Pricier than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 512 GB (16 × 32 GB)
Higher than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $33.98 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-328K16
Total capacity512 GB (16 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items512 GB 16 × 32 GB DDR5 6400 MHz PC5-51200 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

How much power does each 32 GB DDR5 RDIMM draw at the rated 1.10 V when the server runs continuously?

Each module operates at 1.10 V; total kit power depends on the number of populated slots and the motherboard's memory-controller efficiency.

What must the motherboard provide for this 16-module kit to be recognised at full 512 GB capacity and 6400 MT/s?

The board needs 16 DDR5 RDIMM slots, support for 2Rx8 registered ECC DIMMs, and a memory controller qualified for DDR5-6400 at 1.1 V.

Can I populate the remaining Supermicro H13DSH slots with older DDR5 RDIMMs of different rank or speed?

Mixed ranks or speeds will force all channels to the lowest common denominator; the H13DSH manual specifies approved population rules for full-speed operation.

More in Model-Specific Memory Upgrades

Similar items