We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in a row, bare circuit boards with black chips, no heat spreaders, 288-pin edge connectors visible

NEMIX RAM

NEMIX RAM DDR5 5600 128GB (8x16GB) CL46 1.1V ECC RDIMM GIGABYTE MS34-CP0 memory upgrade

SKU CH-9XAQ-PHQTM

Eight-module 128 GB DDR5 kit with ECC and registered buffering for the GIGABYTE MS34-CP0 motherboard

  • Total capacity128 GB (8 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 128GB 8X16GB

Show 18 more
  • 128 GB total capacity from eight 16 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches the board's memory controller spec
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 exactly

Precise DDR5-5600 ECC RDIMM kit

This NEMIX RAM kit delivers 128 GB across eight 16 GB DDR5-5600 modules rated at PC5-44800. Each 288-pin RDIMM operates at 1.1 V with CL46 latency and registered ECC architecture for server-grade reliability. The kit is verified for the GIGABYTE MS34-CP0 motherboard.

Suited for full-capacity server upgrades

Administrators populating every slot on a compatible Gigabyte board will benefit from the registered buffer and on-die ECC that maintain stability at maximum density. Builders needing unbuffered UDIMMs, SODIMM form factors, or non-ECC memory for consumer platforms cannot use this kit.

Steady throughput under sustained load

Registered buffering reduces electrical load on the memory controller, allowing all eight ranks to run continuously at the rated 5600 MT/s without throttling. ECC corrects single-bit errors in real time, preventing silent data corruption during extended compute or virtualization workloads.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $3,594.99
Pricier than about 75% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (8 × 16 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $28.09 per GB
Pricier than about 79% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K8
Total capacity128 GB (8 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items128 GB 8 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Do I need a GIGABYTE MS34-CP0 motherboard for this 128GB 8x16GB DDR5 5600 CL46 1.1V ECC RDIMM kit to work?

Yes, this exact-match kit is validated for the GIGABYTE MS34-CP0 motherboard. It uses the 288-pin Registered RDIMM form factor and 1Rx8 rank configuration that this board requires for full 128GB capacity at DDR5-5600 speeds.

Will these 1.1V CL46 1Rx8 Registered ECC DDR5 modules run alongside any existing RDIMMs already installed in the server?

The kit is specified for the MS34-CP0 population rules. Mixing registered ECC modules with different ranks, voltages or timings can prevent full-capacity operation, so install all eight 16GB modules together per the motherboard manual.

How do I confirm the kit is running at DDR5 5600 PC5-44800 CL46 after installation?

Check the BIOS memory information or OS tools such as dmidecode; they should report 128GB total, DDR5-5600 speed, PC5-44800 data rate, CL46 latency, 1.1V voltage and Registered ECC status for each of the eight 1Rx8 DIMMs.

More in Model-Specific Memory Upgrades

Similar items