We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks, bare chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 192GB 2x96GB ECC RDIMM Supermicro H13DSG-O-CPU memory upgrade

SKU CH-E733-Z3NQ1

A 192 GB DDR5 5600 ECC RDIMM kit (2×96 GB, CL46, 1.1 V) verified for the Supermicro H13DSG-O-CPU motherboard

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 192 GB total capacity from two 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on this platform
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU memory slots

Capacity and Compatibility

This 192GB kit uses two 96GB DDR5 RDIMMs rated at 5600MHz PC5-44800 with CL46 timing and 1.1V operation. The modules are built as 2Rx4 Registered ECC memory specifically validated for the Supermicro H13DSG-O-CPU motherboard. System administrators upgrading that platform receive the exact rank, voltage and timing the memory controller expects for full-capacity recognition at rated speed.

Build Integration

The 288-pin Registered form factor matches the slots on the target motherboard and is not interchangeable with UDIMM or SODIMM alternatives. Registered architecture buffers the command and address signals so the memory controller can drive a fully populated configuration without signal degradation. ECC functionality detects and corrects single-bit errors in flight, preventing silent data corruption and unplanned reboots in production workloads. Consult the system manual for approved DIMM population order before installation.

Warranty and Support

The kit ships as a matched pair of 96GB modules with no heat spreader included. NEMIX RAM backs the memory with a lifetime replacement warranty and provides US-based technical support at no extra charge. Major OEM DRAM from Samsung, Micron or Hynix underpins the modules, but the critical value is the verified fitment for the named Supermicro platform rather than the specific chip supplier.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,057.99
Pricier than about 80% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $26.34 per GB
Pricier than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 2 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Will the 5600 MT/s speed hold steady under continuous server workloads?

The kit runs at DDR5 5600 with CL46 timings at 1.10 V, so the rated frequency is maintained as long as the platform keeps the modules within spec.

How much heat and power should I expect from the 2Rx4 RDIMMs in a fully populated chassis?

Registered DDR5 RDIMMs at 1.10 V draw modest power and have no heat spreader; airflow across the 288-pin modules keeps temperatures in normal server range.

Does the Supermicro H13DSG-O-CPU require any specific BIOS setting or population order for these 96 GB modules?

The motherboard manual defines the approved DIMM population sequence and maximum capacity per channel; follow that guide before installing the 2 x 96 GB kit.

More in Model-Specific Memory Upgrades

Similar items