NEMIX RAM DDR5 5600 1TB 8x128GB ECC RDIMM 4Rx4 CL46 1.1V Supermicro X14SDW-64CM-SP9F memory upgrade

Exact-match 1TB DDR5-5600 kit for Supermicro

This 1TB kit contains eight 128GB DDR5 RDIMMs rated at 5600MT/s (PC5-44800) with CL46 latency and 1.1V operation. Registered ECC modules with 4Rx4 organisation are built to the precise rank, voltage and timing the board's memory controller expects. The 288-pin RDIMM form factor matches the slots on the Supermicro X14SDW-64CM-SP9F motherboard so the system recognises the full capacity at rated speed.

Registered ECC stability at 1.1V

Registered architecture buffers the command and address signals, reducing electrical load on the memory controller when all slots are populated. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots. The modules run at the standard DDR5 voltage of 1.10V and have no heat spreader, relying on the server chassis airflow for cooling during continuous operation.

Eight-slot population for maximum capacity

The kit fills all eight DIMM slots on the supported Supermicro motherboard, delivering 1TB in a single validated configuration. No mixing of ranks or capacities is required, and the 4Rx4 organisation follows the board's population rules for full-speed operation. Builders who need a different total capacity or a smaller module count should verify the motherboard's qualified vendor list before purchasing.