Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
384 GB DDR5 server memory kit in six 64 GB registered ECC RDIMMs at 5600 MHz CL46 1.1 V for Supermicro H13DSG-O-CPU
This 384GB kit contains six 64GB DDR5 5600 RDIMM modules built to the Supermicro H13DSG-O-CPU motherboard's exact specifications. Registered ECC architecture and 2Rx4 organisation let the memory controller address every slot at full capacity without signal degradation. The 1.10V operating voltage and CL46 timing match the board's trained profiles so the system posts at rated speed immediately. It is not for buyers who need unbuffered UDIMMs or laptop SODIMMs.
Registered buffering offloads the memory controller so all six slots remain stable under continuous multi-threaded workloads such as virtualisation hosts or database servers. On-die ECC detects and corrects single-bit errors in real time preventing silent data corruption that would otherwise trigger unplanned reboots. Major OEM Samsung Micron Hynix DRAM ensures consistent thermal behaviour during extended duty cycles. It is not for workloads that demand lower latency timings than CL46 or higher frequencies than 5600.
Each 288-pin RDIMM seats in the motherboard's DDR5 slots following the population order printed in the Supermicro manual. No heat spreaders are present so clearance conflicts with oversized CPU coolers are avoided. The keyed notch prevents backward insertion and the registered design tolerates full six-slot population without training failures. It is not for boards that require UDIMM pin-outs or that limit registered DIMM capacity per channel.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Server Memory |
| Model name | DDR5 ECC RDIMM Registered Server Memory |
| Part number | MR44800-924K6 |
| Total capacity | 384 GB (6 × 64 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL46 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 384 GB 6 × 64 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT |
Each module operates at 1.1 V DDR5 standard voltage; registered buffering reduces electrical load on the memory controller so fully populated channels stay stable at the rated 5600 MT/s speed.
The board requires 288-pin DDR5 RDIMM slots and a specific population order; consult the motherboard manual for approved DIMM sequences before installing all six modules.
Mixing ranks, latencies or voltages is not recommended; the memory controller expects identical 2Rx4 CL46 1.1 V modules across every populated channel for correct operation.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?