We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 384GB (8×48GB) ECC RDIMM CL46 1.1V 2Rx8 memory upgrade for GIGABYTE MS34-CP0

SKU CH-NYCK-9SDAS

384 GB DDR5-5600 ECC registered kit of eight 48 GB RDIMMs at CL46 and 1.1 V for the GIGABYTE MS34-CP0 motherboard

  • Total capacity384 GB (8 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 384GB 8X48GB

Show 18 more
  • 384GB total capacity from eight 48GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for GIGABYTE MS34-CP0
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10V operation matches the platform voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the exact slot type the motherboard expects

384GB DDR5 ECC RDIMM kit for GIGABYTE MS34-CP0

This 384GB kit contains eight 48GB DDR5 5600 RDIMMs built to the exact rank, voltage and timing the GIGABYTE MS34-CP0 memory controller expects. Registered ECC architecture with 2Rx8 organisation and CL46 latency lets the board recognise full capacity at rated speed. It is designed for servers that require registered modules and will not work in systems needing unbuffered UDIMMs or SODIMMs.

Sustained-load behaviour with registered ECC

Registered buffering offloads the memory controller so all eight slots remain stable when fully populated under continuous workloads. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during long-running tasks. The 1.10V operating voltage supports efficient operation across extended duty cycles. Modules without heat spreaders rely on chassis airflow to maintain thermal limits.

DDR5 5600 interface practical limits

The PC5-44800 standard delivers 5600 MT/s throughput on the 288-pin DDR5 bus, but actual bandwidth depends on the motherboard's memory population rules and supported DIMM-per-channel limits. Consult the system manual for approved installation order and maximum supported capacity per channel before configuring. This kit matches the board's DDR5 5600 specification and cannot operate at speeds or voltages outside the controller's validated range.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $9,817.99
Pricier than about 87% of the 21,161 comparable items (median $397.99).
Total capacity 384 GB (8 × 48 GB)
Higher than about 85% of the 20,941 comparable items (median 32 GB).
Price per GB $25.57 per GB
Pricier than about 70% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K8
Total capacity384 GB (8 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items384 GB 8 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much heat and power do eight 48 GB DDR5 5600 CL46 registered ECC modules draw when the server runs continuously?

Each module operates at 1.1 V; the registered design reduces electrical load on the memory controller, helping the fully populated system stay stable during all-day operation.

What must the GIGABYTE MS34-CP0 motherboard already provide for this 384 GB kit to be recognised at full capacity?

The board needs eight 288-pin DDR5 RDIMM slots that support 2Rx8 registered ECC DIMMs at 5600 MT/s and a BIOS that allows the full 384 GB population.

Can I mix these 2Rx8 CL46 registered ECC sticks with older DDR5 modules of different rank or latency in the same MS34-CP0?

Mixing ranks or timings is not recommended; the motherboard's population rules expect identical 2Rx8 CL46 registered ECC DIMMs in every populated slot for reliable operation.

More in Model-Specific Memory Upgrades

Similar items