We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM DDR5 5600 96GB (2x48GB) ECC RDIMM CL46 1.1V 2Rx8 Supermicro H14SST-G memory upgrade

SKU CH-YKWD-SRGVA

A 96 GB DDR5-5600 registered ECC kit in two 48 GB modules at 1.1 V CL46, validated for the Supermicro H14SST-G motherboard

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 96 GB capacity lets you run large workloads with two 48 GB modules
  • DDR5 5600 speed transfers data at PC5-44800 bandwidth for server throughput
  • ECC registered design detects and corrects single-bit errors while buffering the memory controller
  • 1 V operation at CL46 latency matches the board's exact voltage and timing requirements
  • Verified for Supermicro H14SST-G motherboard with 288-pin RDIMM form factor and 2Rx8 rank configuration

Exact-Match DDR5 RDIMM Kit for Supermicro H14SST-G

This 96GB kit contains two 48GB DDR5 registered DIMMs built for the Supermicro H14SST-G motherboard. Each module runs at 5600 MT/s with CL46 latency at 1.1V. The registered ECC design matches the board's memory controller requirements for full-capacity recognition and stable operation.

Suited for Admins Expanding That Specific Server

Administrators upgrading a Supermicro H14SST-G system get verified fitment and the registered architecture that allows full slot population. Buyers with consumer desktops, workstations using unbuffered memory, or any motherboard outside the validated compatibility list should look elsewhere because the RDIMM form factor and ECC function will not work.

Registered ECC Architecture Decides Compatibility

The 2Rx8 registered ECC construction offloads the memory controller so every slot runs fully populated while correcting single-bit errors on the fly. If the target platform requires unbuffered UDIMMs or non-ECC modules, this kit will not function. Verify the manual calls for registered DDR5 RDIMMs before purchasing.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,149.99
Pricier than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $22.40 per GB
Pricier than about 67% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 2 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

How can I verify the 96GB kit is running at DDR5 5600 CL46 after installing it in my Supermicro H14SST-G?

Check the BIOS memory information or a tool like CPU-Z to confirm the speed shows 5600 MT/s, CAS latency reads 46, voltage is 1.1 V and both 48 GB modules are detected as a 96 GB 2Rx8 Registered ECC kit.

What exactly is included in the package and do I need any extra parts for installation?

The box contains the 96 GB kit as two 48 GB 288-pin DDR5 RDIMMs; no heat spreaders, cables or additional hardware are supplied or required for standard server DIMM slots.

Should I choose this 96 GB 2x48 GB DDR5 5600 CL46 kit or a different capacity for the H14SST-G?

Select this 96 GB 2x48 GB kit when your board's qualified vendor list approves 48 GB 2Rx8 Registered ECC modules and you need the full 96 GB capacity at the rated 5600 MT/s speed.

More in Model-Specific Memory Upgrades

Similar items