We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 96GB (6x16GB) ECC RDIMM CL46 1.1V Supermicro H13SSH

SKU CH-P0KR-MM8DK

96 GB DDR5 server memory kit with six 16 GB ECC registered DIMMs at 5600 MHz, CL46, 1.1 V, validated for Supermicro H13SSH

  • Total capacity96 GB (6 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 96GB total capacity from six 16GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency for rated data throughput
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1V operation at standard DDR5 voltage for efficient power draw
  • Verified fitment with Supermicro H13SSH motherboard using 288-pin RDIMM form factor

Exact-match DDR5 kit for Supermicro H13SSH

This 96 GB kit contains six 16 GB DDR5 5600 Registered ECC RDIMMs built to the exact rank, voltage and timing the server memory controller expects so the full capacity is recognised at rated speed. It is intended for administrators upgrading or populating a Supermicro H13SSH motherboard.

Registered RDIMM form factor with ECC

Each module uses the 288-pin Registered DIMM layout this board requires rather than UDIMM or SODIMM and operates at 1.10 V with CL46 latency. Registered architecture offloads the memory controller so every slot runs fully populated while ECC catches and corrects single-bit errors on the fly preventing silent data corruption.

DDR5 5600 interface limits

The DDR5 5600 standard sets the maximum transfer rate and timing envelope these modules operate within so bandwidth and latency are bounded by that specification. Population rules and maximum supported capacity vary by motherboard revision so the system manual must be consulted before installation to confirm supported configurations.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,891.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (6 × 16 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $30.12 per GB
Pricier than about 86% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K6
Total capacity96 GB (6 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 6 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Does DDR5-5600 (PC5-44800) run at its rated 5600 MT/s on the Supermicro H13SSH?

Yes, the kit is spec-matched to the H13SSH memory controller so the six 1Rx8 modules are recognised at full capacity and operate at DDR5-5600 without down-clocking.

What physical slot and form factor do these modules need?

Each module is a 288-pin DDR5 RDIMM; the H13SSH requires Registered DIMMs, not UDIMM or SODIMM, and all six slots must accept that exact form factor.

How are the six DIMMs installed, and which step is often missed?

Follow the motherboard manual for the approved population order — typically filling specific channels first — because installing all six without that sequence can prevent the system from posting.

More in Model-Specific Memory Upgrades

Similar items