We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 128GB 8x16GB CL46 1.1V Supermicro H13SSF memory upgrade

SKU CH-P6KT-80BDM

128 GB DDR5 5600 ECC registered RDIMM kit of eight 16 GB modules at CL46 and 1.1 V for the Supermicro H13SSF motherboard

  • Total capacity128 GB (8 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 128GB kit fills eight slots for maximum server capacity
  • DDR5 5600 speed matches board spec for rated performance
  • Registered ECC design corrects single-bit errors to prevent data corruption
  • 1V operation meets platform voltage requirement for stable operation
  • CL46 latency and 1Rx8 rank align with memory controller expectations

Exact-match server kit

This NEMIX RAM kit delivers 128GB of DDR5 memory across eight 16GB registered DIMMs. It is built for administrators upgrading a Supermicro H13SSF motherboard that requires DDR5-5600 RDIMMs with ECC.

Registered ECC stability

Each module uses a 288-pin RDIMM form factor with 1Rx8 organisation and runs at 1.1V CL46. The registered buffer reduces electrical load on the memory controller when all slots are populated, while on-die ECC corrects single-bit errors before they affect workloads.

Replaces partial or slower sets

The kit replaces smaller-capacity or lower-speed DDR5 RDIMMs when the board's population rules allow eight modules at full frequency. It is not for systems limited to fewer slots, UDIMM-only platforms, or builds that need a different voltage or latency profile.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $3,847.99
Pricier than about 76% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (8 × 16 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $30.06 per GB
Pricier than about 86% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K8
Total capacity128 GB (8 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items128 GB 8 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

What speed does the DDR5 5600 interface actually run at on the Supermicro H13SSF?

The kit is rated DDR5 5600 (PC5-44800) and will operate at that speed when the motherboard memory controller is configured for DDR5-5600.

What physical slot and form factor do these modules need on the H13SSF?

Each 16 GB module is a 288-pin RDIMM; the board requires registered DIMMs, not UDIMM or SODIMM, and all eight slots must accept this form factor.

How are the eight DIMMs installed and which step is often missed?

Populate the eight slots in the exact order shown in the Supermicro H13SSF manual; the common mistake is skipping the prescribed population sequence, which prevents full 128 GB recognition.

More in Model-Specific Memory Upgrades

Similar items