We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM sticks in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 576GB 6x96GB CL46 Supermicro H13SSH memory upgrade

SKU CH-57S8-VE7AA

A 576GB DDR5 ECC RDIMM kit of six 96GB modules at 5600MHz CL46, registered and 1.1V, validated for Supermicro H13SSH motherboards

  • Total capacity576 GB (6 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 576 GB total capacity from six 96 GB modules for dense memory workloads
  • DDR5 5600 speed with CL46 timing delivers rated bandwidth without manual tuning
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operating voltage matches the DDR5 standard for efficient server operation
  • Verified compatible with Supermicro H13SSH motherboard for guaranteed fitment

Exact DDR5 576GB upgrade for Supermicro H13SSH

This 576GB kit contains six 96GB DDR5 5600 RDIMMs built to the precise 2Rx4 1.10V CL46 specification the H13SSH memory controller expects. It is intended for administrators expanding a single Supermicro H13SSH server to its full registered ECC capacity.

DDR5 RDIMM registered architecture limits

Registered buffering allows every slot to run fully populated at the rated 5600 speed, while ECC corrects single-bit errors on the fly. The 288-pin DDR5 form factor is mandatory; UDIMM or SODIMM modules will not fit and cannot be used in this board.

6 x 96GB 2Rx4 CL46 kit decides fit

The six-module 2Rx4 layout must match the motherboard's approved population order and maximum supported capacity per slot. If your H13SSH configuration requires a different rank structure, total capacity, or DIMM count, this kit will not be recognised at full speed or capacity.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $16,991.99
Pricier than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 576 GB (6 × 96 GB)
Higher than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $29.50 per GB
Pricier than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K6
Total capacity576 GB (6 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items576 GB 6 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Should I pick the 576GB 6x96GB kit or a different capacity for my Supermicro H13SSH?

The 576GB kit uses six 96GB modules to fill all slots at the rated DDR5-5600 speed. Check your motherboard manual for the approved population order and maximum supported capacity before choosing a smaller or larger kit.

What does the DDR5-5600 CL46 rating deliver once installed in the H13SSH?

The modules run at 5600 MT/s with a CAS latency of 46 cycles at 1.10V. Registered ECC operation keeps every slot stable at full population while correcting single-bit errors on the fly.

How does the 288-pin RDIMM interface limit performance on this board?

The 288-pin Registered DDR5 form factor is the only type the H13SSH accepts. It caps the kit to the board's native DDR5-5600 transfer rate and requires the 2Rx4 rank structure for full 576GB recognition.

More in Model-Specific Memory Upgrades

Similar items