We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 192GB (12x16GB) 1Rx8 CL46 1.1V Supermicro H13SSF memory upgrade

SKU CH-SVSB-4F8P1

A 192 GB DDR5 registered ECC kit of twelve 16 GB modules running at 5600 MT/s with CL46 latency and 1.1 V, built for the Supermicro H13SSF motherboard

  • Total capacity192 GB (12 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 192GB kit fills every slot at rated DDR5-5600 speed
  • Registered ECC design catches single-bit errors before they corrupt data
  • 1V operation matches the Supermicro H13SSF memory controller exactly
  • 12x16GB 1Rx8 modules follow the board's population rules
  • CL46 timing keeps latency predictable under full load

192 GB DDR5 ECC RDIMM kit for Supermicro H13SSF

This 192 GB kit contains twelve 16 GB DDR5 5600 RDIMM modules built for the Supermicro H13SSF motherboard. Each module is a 288-pin registered ECC DIMM running at 1.1 V with CL46 latency. The registered design lets the board run every slot populated at the rated speed.

Suited for admins expanding H13SSF capacity to 192

Server operators who need the exact rank, voltage and timing the H13SSF memory controller expects will get plug-and-play recognition. Builders using consumer UDIMMs, SODIMMs, or non-ECC memory should look elsewhere because the board requires registered ECC RDIMMs. Systems that cannot accept twelve DIMMs or that demand a different voltage or latency will not support this kit.

Registered ECC RDIMM with 1Rx8 organisation

The single-rank 1Rx8 organisation combined with registered buffering and on-die ECC is the specification that decides compatibility. It matches the H13SSF population rules so all twelve slots operate at DDR5 5600 without downclocking. If your platform requires dual-rank modules, unbuffered DIMMs, or a different CAS latency this kit will not work.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,680.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (12 × 16 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $29.59 per GB
Pricier than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K12
Total capacity192 GB (12 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 12 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Does the 288-pin DDR5 RDIMM form factor fit the Supermicro H13SSF motherboard slots?

Yes, the kit uses 288-pin DDR5 RDIMM modules, which is the exact form factor required by the Supermicro H13SSF motherboard.

What is the correct installation order for the 12 modules in the Supermicro H13SSF?

Install the 12 modules following the motherboard manual's DIMM population sequence; the kit is spec-matched to the board's rules but the manual defines the exact slot order.

Will the 1.1V operating voltage of these modules require any future adjustment or replacement?

The modules run at the standard 1.1V for DDR5 and are covered by a lifetime replacement warranty if any module fails.

More in Model-Specific Memory Upgrades

Similar items